Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Electronic speed control on the fritz....

Posts

Electronic speed control on the fritz....

#1

Electronic speed control on the fritz....

Mike in Southern NJ

I have an 15 year +/- old Elu electronic plunge router that is 3.5 HP and variable speed. Its the dark grayish-black model. I know.....there little arn in it.

The tool ran like a champ until tonight when I was using it at it's slowest speed. All of a sudden, it sped up to what I imagine was the max RPM, without even touching the speed control dial. I rotated the speed control dial.....nothing. Then I took off the top of the router and brushed away the fine caked dust. I didn't want to blow it out with and compressed air until I queried you guys about whether that could blow some dust into a crevice and cause more problems. Nothing changed. I anyone has an idea of needs to see picture, please send me your email address.

Thanksd for your time and suggestions.

Merry Christmas,

Mike Stadulis

mstadulis@comcast(dot) net

Re: Electronic speed control on the fritz....

#2

Dale Lenz

Blow away

Dale Lenz

Re: Electronic speed control on the fritz....

#3

Re: Electronic speed control on the fritz....

John Veerkamp

Most ww motors benefit from a good shot of air on a regular basis. I second what Dale advised.

Re: Electronic speed control on the fritz....

#4

Re: Electronic speed control on the fritz....

Walt Smith

I'm not sure about Elu, but DeWalt routers have a (circular?) magnet on top of the rotor that fails semi-regularly and the symptoms are what you describe--full speed and no control. If blowing it out doesn't work, it might be worthwhile to pull the rotor and see if there are any fractured or loose parts.

Re: Electronic speed control on the fritz....

#5

Re: Electronic speed control on the fritz....

Mike in Southern NJ

Thanks Walt. The Elu design was purchased by DeWalt and its the same machine in different colors. I pulled off the circular dial and there was some dust cake in there. When I removed the dust, I found two shiny contacts that were not sprung. I cleaned them with a flux brush and then blew out the area and motor w/ compressed air. It works now, although I'm not sure that its as "smooth" as it used to be. I have no idea how that speed control works, but I didn't want to pull it apart further. You know how these things go. Seems simple until there is a spring that you uncover and "boinggg!"

Thanks,

Mike