Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Delta 36-920 Grand Edition White

Posts

Delta 36-920 Grand Edition White

#1

Delta 36-920 Grand Edition White

Todd Nebel

I have this saw with a Unifence (36-906) that I bought in 1999. I woud really like to change out the Unifence with a Biesemeyer. I can't seem to find the model number for the Biesemeyer going through Delta's part lists. Does someone here know the part number I'm looking for so I can start to keep an eye out on craigslist or shop the internet?

Much thanks.

Todd

Re: Delta 36-920 Grand Edition White

#2

Re: Delta 36-920 Grand Edition White

Chuck Lenz

Out of curiosity, why would you want to switch fences ? I've had a Unifence on my saw since 1995 and see absolutely no reason to use anythiong different. In my opinion the Unifence does more then a Biesemeyer, and does it just as accurately.

Re: Delta 36-920 Grand Edition White

#3

Re: Delta 36-920 Grand Edition White

Phil Joines

I have one I never installed. I like the uni better and bon't have room for a 50" rail. The fence, rail, legs, mobile base extension, etc except the table. I don't know what it's worth or how to go about shipping it (it's heavy). I'm located about 50 miles north of Dallas, Texas.

Re: Delta 36-920 Grand Edition White

#4

Re: Delta 36-920 Grand Edition White

Steve Schoene

Just search Google Biesemeyer. The Biesemeyer fence with fit on any Unisaw from about 1939 onward. I,m not sure about the New Unisaw, but I'd bet it fits that too. For most parts, you don't need a model number for Unisaw beyond distinquishing right or left tilt, (though there is an old style arbor on really old Unisaws) or a part number for the Biesemeyer fence. For example the basic version of Biesemeyer splitter fit with no modifications on my 1946 Unisaw.

Re: Delta 36-920 Grand Edition White

#5

Re: Speaking of the Biesemeyer removeable splitter

Chuck Lenz

For my Contractor's saw it's about $150. That just seems a tad bit rediculous to me for what it is. I'd like to have one, but lets get real.

Re: Delta 36-920 Grand Edition White

#6

although bullet proof...

McKay

Although the besimeyer is nearly bullet proof, It does not have the capabilities that the uni fence has. I taught at a high school for 31 years and had nothing but the besimeyer type fences. At my own shop I have the unifence and would not trade it for anything. I upgraded the fence itself with a fence from Peach tree, but the uni-fence is much more versatile for professionals.

This picture shows how the fence can be moved back for cutting plys. The fence can then be moved forward for regular ripping.

The fence can be moved back for cross cutting or table rabbeting but on this picture I did not move the fence. The fence from Peach tree has the slick plastic insert that makes the moving of the fence not really necessary. Jigs can be slid into the t-slots for many applications. For my money I would never use anything other than the uni-fence.

Re: Delta 36-920 Grand Edition White

#7

Get real splitters *LINK*

Hoa in Alameda

Hey Chuck,

May as well steal this thread ;)

Delta has a poor man's version of the Biesemeyer splitter for about $40 IIRC. It is thinner, but very similar to its Biesy brother. See link below if you'd like to buy one (I have no association with the store, just happen to find it on-line)

For even poorer man's versions, you can make splitters from heavy duty brackets available from home centers for a few $. I made several. A nice thing about these splitters is that it is almost as thick as a full-kerf blade.

Delta splitter and two shop-made versions:


The low profile splitter allows me to use the Micro Jig GRR-Ripper push block:





http://www.mikestools.com/1349941-Delta-Splitter-Assy.aspx

Re: Delta 36-920 Grand Edition White

#8

Found an article *LINK*

Hoa in Alameda

Don't you hate it when you reply to your own post 8)

I found an article on the Delta splitter, link below. It may not apply to you but has some good photos of the splitter.


Delta Removable Splitter for your Jet JTAS-10

Re: Delta 36-920 Grand Edition White

#9

Got One

Mark Mandell - Gone Round In Jersey

It's most always in place on my JET cabinet saw. I did, however, remove the kickback "pawls" as I regard them as a waste of time. I also use an Excalibur over-arm guard.

The Uni-fence ability to slide back to guide sheet goods is a very nice feature, but it's easily replicated with a shop-made fixture that clamps on to the Bies-style fences and projects backwards 24" or so.

Re: Delta 36-920 Grand Edition White

#10

Re: Get real splitters

Chuck Lenz

Thanks Hoa, around $40 is more like it, plus it has the anti-kickback pawls.

Re: Delta 36-920 Grand Edition White

#11

Thanks

Todd Nebel

Hi Phil,

Thanks for the offer, but I live in eastern Pennsylvania.

Todd

Re: Delta 36-920 Grand Edition White

#12

Thanks

Todd Nebel

Hi Steve,

Thanks for the information.

Todd