Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Grizzly bandsaws

Posts

Grizzly bandsaws

#1

Grizzly bandsaws

Bud

Hello everyone. I have a power tool question. FWW has a bandsaw comparison in their winter edition. In it, they choose the Grizzly saws as both best tool and best vaue. I happen to be shopping for a bandsaw of the 18" flavor, so the article was timely.

Here's the rub; the favored saws both come with motor brakes. Of course, neither one of them is in stock at Grizzly. Can anyone say if the brake is worth the wait and the extra $$$? Also, when looking at the saw comparison chart, the only difference between 2 of the 17" bandsaws is that one had a steel trunnion, the other a cast iron trunnion. The cast is more money, is that worth the difference?

Thanks in advance, Bud

Re: Grizzly bandsaws

#2

Good question

Gil Jones

I would also be interested in the answer as a 17" or 19" bandsaw is my next tool purchase,

and Grizzly looks to be a good deal.

Gil

Re: Grizzly bandsaws

#3

Re: Grizzly bandsaws

Matt Overton

I have the Jet 18" and it has no brake. I love the machine, but it takes the blade a full minute to come to a stop. I would consider waiting for the brake.

Re: Grizzly bandsaws

#4

Re: Grizzly bandsaws

Bill Houghton, Sebastopol, CA

The steel trunnion is probably a steel stamping. Lots of saws over the years have had these. If it's done well, fine; but if it's thin, it seems more likely to flex than cast iron.

Re: Grizzly bandsaws

#5

Re: Grizzly bandsaws

Richard McComas

It's always worth waiting to get what you want.

Re: Grizzly bandsaws

#6

Re: Grizzly bandsaws

doug f, san clemente, ca

Bud - I have an 18" Agazzani with the brake, not the Grizzly saw, but the principle is the same. Though I don't use the brake often, I'm very glad I have it when I need it. If you're doing multiple cuts with different fence settings, the time you wait for the blade to wind down gets quite annoying.

Hold out for what you really want, it'll be worth it.

Doug

Re: Grizzly bandsaws

#7

Clint Searl

Re: Grizzly bandsaws

Clint Searl

If you turn off the machine because you're finished with it, what is a minute of spindown worth?

Clint

Re: Grizzly bandsaws

#8

Re: How times have changed

Chuck Lenz

Whats the next FWW recommendation ? The Harbor Freight 2 hp DC ? How incredibly sad where this country has gone.

Re: Grizzly bandsaws

#9

JL

Re: Grizzly bandsaws

JL

I don't have a Grizzly. I do have saws with cast iron trunnions. IMO, the trunnions are worth it. I don't know about the brake.

It does take my saws a good minute to spin down.

So - if it were me, I would wait for a trunnion. I am ambivalent about a brake.

Re: Grizzly bandsaws

#10

Re: Grizzly bandsaws

Keith Inscho

I have a Grizzly 14" with a riser block, and all I can say is it has been an excellent saw. It doesn't have a brake, but I can see where that would be handy if, as pointed out, you made lots of multiple cuts. Cast iron is better, but not necessary unless you plan on production type use or you just want to leave it to the grand kids. ;)

Re: Grizzly bandsaws

#11

Re: Grizzly bandsaws

Bud

Thanks everyone for your valued comments. I agree with those of you who advised that I wait to get what I want. However, Clint Searl's question "how much is a minute of spindown worth?" was perhaps the most penetrating (believe me, it takes a lot to penetrate my thick skull). My answer - not much.

I will follow the advice of several of you and opt for the cast trunnion.

I have just placed my order for the 19" saw with cast trunnion but no motor brake. That extra $200 will get me the shoulder plane I want.

Thanks again. Bud

Re: Grizzly bandsaws

#12

Re: Grizzly bandsaws SAFETY ISSUE

Don Evans

From a safety stand point it is worth a lot!

It is very easy to stick you hand in a moving bandsaw blade with out even thinking about it. The foot pedal braking on bandsaws was a great addition for safety.

It's very hard to see the blade moving and easy to reach in there to get that scrap cut off of the table.

I've got a brake on mine and still almost did that one day because I didn't press the pedal hard enough to stop the blade reached over to get a scrap and realized the blade was still moving. Didn't touch the blade that time fortunately but I learn real quick to press that pedal harder and stop that blade....

Don