Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Finishing matching

Posts

Finishing matching

#1

Finishing matching

Gary Smyth

Finishing

I bought some Transtint dyes to make effort to match some remaining finish on an older cabinet that also has some unfinished new wood. In my mind this is a overall color base coat to be followed by other color finishes depending on the �look� after it is applied. I�ve been idle doing, by thinking about this, for the past week reading about the possibilities. I remain not knowing the proper sequence to follow. Do I apply the dye first and match as closely as possible followed by a washcoat of 1 pound blonde shellac? Do I do the washcoat first and then the dye (the dye in denatured alcohol will blend with the washcoat)? Do I mix the two together to begin with and if the colors match well enough (after test pieces) then what do I use to seal it? I�m thinking that a true match is not possible with just the dye (it will be used to get all the wood about the same shade) and a gel coat will probably need to be used to unite the colors later.

I�ve researched Dresdner, Jewitt, Bridgewater, Flexner, Crump and the more I read the worse it gets.

Also is there a temperature minimum before doing this?

Re: Finishing matching

#2

FFF

David Yoho

No matter what you do or how you do it, the best advice is to Finish Firewood First. This means don't try it on the real thing first. Get some wood of the same species (better is it's scraps of the intended wood to be finished) and practice your finish there until you get it where you want it.

Re: Finishing matching

#3

Re: Finishing matching

Jesse Cloud

Matching an existing finish is very hard to do. +1 on the FFF advice.

You do not want to use a dye that will dissolve into the shellac, unless your goal is to spray the whole piece.

Your best shot will be building up layers of color, sealing between each layer. If the dyes dissolve into the shellac, you will get a muddy final result.

Although its tedious, keep meticulous records of the quantities of different dyes you try - so if you do find the answer you can repeat it!

If this is tying you in a knot, take the piece to a refinisher, let the expert do it.