Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Clothes Washer supply hose Questions OT

Posts

Clothes Washer supply hose Questions OT

#1

Clothes Washer supply hose Questions  OT

Barry Irby

Back to working on the foreclosure house for my son. The washer and dryer they bought are going to require being as close to the back wall as possible to allow the door s to operate properly. I need hoses that have right angle bends on both ends. I can find them with the connectors on one end, but not both. I thought about just buying a right angle connector and converting any hose, but have not been able to find them.

So, where would you go looking? I tried Ebay and Google. Any suggestions on how to get the machines close to the wall? Even the dryer needs a water hose, it has a steam feature.

Re: Clothes Washer supply hose Questions OT

#2

Re: Clothes Washer supply hose Questions  OT

woodenleg

This is going to sound strange but go to a hose supply shop, ones that can make up hoses(hydrolic hoses). I had to do this for one house that I lived in, that was almost 30yrs ago, hose is still working find.

Dave

Re: Clothes Washer supply hose Questions OT

#3

William A. Roland

Re: Clothes Washer supply hose Questions  OT

William A. Roland

Try the RV section in Wally World or your local RV supply.

Re: Clothes Washer supply hose Questions OT

#4

Do you already have . . .

steve mackay

the "space saver" box in the wall ? It should be deep enough to "contain" all your connections "inside" the wall. With that all you need is a gap as big as your actual hose.

Re: Clothes Washer supply hose Questions OT

#5

Re: Clothes Washer supply hose Questions  OT

John Veerkamp

The Farm supply store where I worked has right angle hose thread ends in both male and female versions. You can make your own hoses or get a pair with one right angle and get the correct ones for the other end, cutting off the straight connector.

Re: Clothes Washer supply hose Questions OT

#6

Re: Clothes Washer supply hose Questions  OT

Bill Turpin in WNC mountains

Buy two hoses, cut a 90� end off, install in the other hose with a clamp.

Re: Clothes Washer supply hose Questions OT

#7

Thanks, Went to wally World.....

Barry Irby

and Bought three right angle hose connectors. That was all they had, but it was enough.

This is one of those things that once you look at it you have to wonder. Why do the connections out the back of the washer stick out straight horizontal and at right angles tot he machine? When does that ever pay off? That means that everyone of them has a hose hanging, torquing the fitting. Its just as well I don't run the world.