Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Clear coat for bean bag toss boards

Posts

Clear coat for bean bag toss boards

#1

Clear coat for bean bag toss boards

Daniel

My woodworking experience is limited, at best. I'm trying to apply a clear coat over 2x6 pine baords for a bean bag toss game. It'll be outside on occassion, and I want the surface to be smooth, clear and durable. I'm also going to put a decal under the coating but on top of the world. I went to Lowes, but I could only find indoor products, and not anyone to help. Any suggestions? Thx!!!

Re: Clear coat for bean bag toss boards

#2

Re: Clear coat for bean bag toss boards

Bill Houghton, Sebastopol, CA

Spar varnish is one possibility - it's initially rather soft, but will slowly get harder. Spar varnish remains more flexible than indoor varnishes, which is why it was recommended for outdoor uses ("spar varnish" because it was used on spars and masts on wooden boats).

I'm surprised all you can find is indoor finishes - I have trouble finding anything BUT spar varnish around here and would prefer to use indoor varnishes for a lot of my work.

I'd look up "paint stores" in the yellow pages - you should find a wide choice there.

Re: Clear coat for bean bag toss boards

#3

Re: Clear coat for bean bag toss boards

Steve Schoene

If it is going to be stored inside and only come outside to play, it will be quite fine with oil based interior varnishes, which are actually more water resistant than spar varnish.

Quality marine spar varnish has UV inhibitors that help protect the finish and the wood from sun for items that must live in the sun for weeks at a time. You can't find a quality spar varnish at any of the big box stores, despite nautical sounding names. The flexibility of spar varnish is pretty much needed only for nautical applications where every thing flexes as it moves on and through the water.

Re: Clear coat for bean bag toss boards

#4

Clint Searl

Re: Clear coat for bean bag toss boards

Clint Searl

You don't need to go overboard on the finish. Any of the oil based polyurethanes, like Varathane or Minwax, will serve the purpose. Any finish will deteriorate if always left outside.

Clint

Re: Clear coat for bean bag toss boards

#5

Re: Clear coat for bean bag toss boards

Bill Tindall

As others have said, unless you leave it out in the rain regularly any varnish will do.

You noted that a decal will be applied under the varnish. The "urethane" varnishes, that is stuff with Urethane in its name and solvent based, will get yellow over time. If the finish turning amber is a problem then use one of the clear water based varnished. I don't have experience with the water based materials. Perhaps someone else can recommend something that will stay more clear. Or go visit you Sherwin Williams store and hope someone experienced is present.

Re: Clear coat for bean bag toss boards

#6

Re: Clear coat for bean bag toss boards

Steve Schoene

Waterborne finishes, which are typically acrylic resin in the main, aren't as durable as oil based varnishes, with less water resistance, and immunity to household cleaners. But they aren't totally fragile--think of them as roughly as durable as nitrocellulose lacquer. They will however not yellow, either initially or over time, to nearly the same extent as will oil based finishes.

Re: Clear coat for bean bag toss boards

#7

Re: Clear coat for bean bag toss boards

steve mackay

I swear by MinWax water base Polyurathane. Use it for EVERYTHING. Sounds like it won't be outside all that much so pervect fit. Easy to use, its idiot proof, you can put on a couple coats a day and it's tough, tough, tough. Tough enough for my picnic table and the wood parts on the grill outside (I put a new coat on every other year or so). You will NOT be disapointed . . . I promise.

Re: Clear coat for bean bag toss boards

#8

question

Bill Tindall

Does this stuff yellow in the sun like typical oil based urethane varnishes?

Re: Clear coat for bean bag toss boards

#9

that is a bit of a simplification

Bill Tindall

While I don't use water based finishes I have friends that make the resins. There are literally hundreds of formulations based on all sorts of chemistry- acrylics, urethanes, polyesters, vinyl, styrene, etc. And the properties are similarly varied. There are cross linked cured floor finishes that certainly are vastly more durable than nitrocellulose lacquer. I tried a urethane from Target that was supposed to be exterior and it had very poor life in this climate. Mold loved it and the table turned black in on summer. On the other hand I was shown an exterior product from General that was shown to have excellent out door life, but it yellows.

I don't use them because I have yet to see one that has the brightness of typical solvent based finishes, lacquer or varnish. The grain raising propensity is annoying. And they are harder to spray than solvent formulations.

Re: Clear coat for bean bag toss boards

#10

Re: Clear coat for bean bag toss boards

Daniel

You guys are awsome. I really appreciate the advice. Will the urethane varnishes have any issue sticking to the decal vs wood?

Re: Clear coat for bean bag toss boards

#11

Ellis Walentine

Adhesion shouldn't be a problem

Ellis Walentine

... but I guess you could have some oddball kind of decal or a can of old varnish or some combination of the two that would prove me wrong. I put decals on a canoe paddle in 1964 and varnished over it. It's still solid as a rock today.

Ellis Walentine, Host

Re: Clear coat for bean bag toss boards

#12

Re: Clear coat for bean bag toss boards

AZ in Colorado Springs

If the decal is made on an ink jet printer, the waterbased poly will dissolve the ink jet ink. Items printed using toner will be OK.

Re: Clear coat for bean bag toss boards

#13

Re: that is a bit of a simplification

Steve Schoene

Yes,it is a simplification, but true for the vast majority of waterbornes available to consumers. Lots more things at the industrial level but that's not relevant for most of us. Just like oil based "poly" for consumers is basically and alkyd resin varnish modified with polyurethane resin--they would be more accurately described by uralkyd varnish.

Re: Clear coat for bean bag toss boards

#14

Re: question

steve mackay

Well, it darkens a bit over time. Inside or out. While I haven't tried every type of finnish out there, I belive any finnish darkens a tad.

Re: Clear coat for bean bag toss boards

#15

"Sticks" to . . .

steve mackay

painted door screen, brass rod, leather, nylon / cotton cord, paper, brass plated clock chain, gold plated jewelry chain, waxed bamboo skewers, itty-bitty copper expanded metal and, oh yes, wood.

The time I made bean bag toss backs I also put on all my hardware (hinges, carry handles and such) first and gave the whole thing a coat in case it ever got left out in the rain.

Re: Clear coat for bean bag toss boards

#16

Re: Adhesion shouldn't be a problem

Dan

What if the decal was a picture, from Walgreens or some other commercial developer. Would that be better, or even work under that urethane?