Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Scratch Stock Tool

Posts

Scratch Stock Tool

#1

Scratch Stock Tool

Thomas Norton

I am need ing to make a scratch stock toll, my first one, in order to reproduce som leg on a ottoman to match a chair. I was thinking about a Dremel type tool to do the profile shaping. I know files would work but hey this is an opportunity for another tool!

So should I go with Dremel brand of a HF import. I do not know how muck use this will get.

Also I have read a few posts and look at You Tube to see the process. Anyone have any pointers?

Thanks!

Re: Scratch Stock Tool

#2

Re: Scratch Stock Tool

Tony - Memphis

Not sure which to recommend. I have a Dremmel and it has served me well. One issue I had with the first one I made was my cutter moved around. I had to do some work on it to keep it from moving. I need to make a new one. I was thinking about making it in two pieces so I could make a seat to keep the cutter from moving (a dado I guess?). Lots of good designs out there. I've used several different bits of metal for cutters and whatever I could grab in my shop to shape the cutters. Great little tool. I just bought an old Stanley 66. It came with a new set of cutters. It has been fun to play with. The first tool I made was to scratch a tiny bead to decorate a couple of pillars that hold a small face mirror. I used a piece of hacksaw blade. I learned quickly that the teeth are hardened! Worked great.

Tony

Re: Scratch Stock Tool

#3

Ellis Walentine

Hmm, scratch stock?

Ellis Walentine

To me a scratch stock is a thin piece of scraper set into a gauge type body, which would seem to be what you want for this quickie, one-off use. But, it sounds like you're using the term to refer to a mini router/edge-beader. Would you be using the Dremel with some kind of fence? Are there curves that would complicate the use of this kind of setup?

I have owned several Dremels over the years and don't care much for them. I used to have a Foredom tool, which I found to be a much better tool, though it costs several times more than a Dremel. If you are looking for a good excuse to buy a nice new tool for yourself, and you have the budget, I'd consider a Foredom or its equivalent.

Ellis

Re: Scratch Stock Tool

#4

I'd stick with files...

John in NM

They're just going to cut faster and give you a better profile than a dremel, unless maybe if you get some carbide die cutting tools for it. Most of those are 1/4" shank and won't fit a dremel though.

Re: Scratch Stock Tool

#5

maybe he means the tool to grind the steel profile

Dick Coers

Re: Scratch Stock Tool

#6

Re: maybe he means the tool to grind the steel pro

Thomas Norton

Yep,

That is what I wa thinking of using it for.

Re: Scratch Stock Tool

#7

Ellis Walentine

Gotcha

Ellis Walentine

Re: Scratch Stock Tool

#8

David Barnett

You could use a Dremel *LINK*

David Barnett

I'd stick with the Dremel brand unless you want to spring for a Foredom, which, like Ellis, I prefer, but... I'd use your tool-buying urge to acquire a Dremel or flexshaft grinder and a nice set of files. Use the die grinder to get close, then finish to your scribed lines with good quality files -- preferably Swiss pattern. Grobet and also Dick files get a lot of use in my shop. Then you can stone them to perfection with this little set of Norton slips from Joel M. at:


Tools for Working Wood - Norton slips

Re: Scratch Stock Tool

#9

Re: Scratch Stock Tool

Robert R. Clough

Thomas, if you really want a simple scratch stock device, Lee Valley has one that looks decent and easy to use.

Re: Scratch Stock Tool

#10

Re: You could use a Dremel

Bill Houghton, Sebastopol, CA

"Then you can stone them to perfection with this little set of Norton slips from Joel M..."

or very fine sandpaper on a dowel or even on a suitable chunk of bolt (the smooth part of the shank, not the threaded part).

I have that stone set - a luxury buy when I was doing some consulting after retirement (at an obscene rate about which I didn't feel one smidge of guilt). It's a lovely set, but doggoned pricey.

Re: Scratch Stock Tool

#11

David Barnett

Pardon my bad manners

David Barnett

"I have that stone set - a luxury buy when I was doing some consulting after retirement (at an obscene rate about which I didn't feel one smidge of guilt). It's a lovely set, but doggoned pricey."

I'll unabashedly admit I have a thoroughly gloatworthy embarrassment of riches when it comes to these things, inasmuch as I snagged two of these delicious sets for twenty dollars apiece along with several boxes of stone files from Norton, Behr-Manning, Gesswein, et al, not to mention (although I will) even more boxes of new old-stock files, gravers and die-sinker's rifflers from the lifelong acquisitions of a veteran gunsmith to several Springfield, Massachusetts firearms manufacturers, and at one of the only three garage sales I've ever attended.

I'd apologize for my obvious self-satisfaction, but as I'm entirely unrepentant, it would be hypocrisy.

Sanding sticks are nice, too, of course.