Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Air Clamps?

Posts

Air Clamps?

#1

Air Clamps?

Thomas Norton

Has anyone had any experience with using these?

I am thinking about a new dovetail jig, possibly a Keller, and was wondering aboutcombining these type of clamps with it.

Also if you have used them where did you buy them?

Thanks!

Re: Air Clamps?

#2

Re: Air Clamps?

Barry Irby

My friend has a cabinet shop and he made himself a tenoning machine. It has air clamps on it. He went a step further and set it so that the clamps open and close automatically. When the slider sits in the 'Home" position the clamps open and you change the piece. As you move the slider forward, the camps slam home. Works great.

OTOH it may not be a huge advantage in a small operation. You have to move a handle or foot pedal to actuate the fastener/Clamp. Not a huge difference than using the clamps on the dovetail fixture.

Re: Air Clamps?

#3

Re: Air Clamps?

Thomas Norton

The one reason I was looking in this direction is after seeing the Clamping set-up on the Keller Dovetail Jig site I cannot seem to locate these type of clamps?

Anyone have anyideas?

Re: Air Clamps?

#4

Re: Air Clamps?

Don Evans

I did a Google search on "air clamps" and came up with lots of links to look at.

Also, on the Keller site they sell manual clamps that look really good to me. It would follow the KISS principle and was not unreasonalble in price for all the parts for the clamps.

I could also ck www.surpluscenter.com and look for air clamps and also air actuators to make up your own if you like to do that type stuff.

Personally I don't see the value of air unless you are going to be doing large production runs?

Don