Shaker Chair Finish?
Thomas Norton
As I plan for Shaker chair I would like some advice on finish. I am palnning on cherry and was think to spray them with regular not catalyized laquer. The rweason is it would be a repairable finish.
Other ideas?
Knowledge You Can Build On — Est. 1998
Shaker Chair Finish?
Thomas Norton
As I plan for Shaker chair I would like some advice on finish. I am palnning on cherry and was think to spray them with regular not catalyized laquer. The rweason is it would be a repairable finish.
Other ideas?
Re: Shaker Chair Finish?
Clint Searl
I think the choice of finish depends on your intent for the chair. What aspect of a finish is most important?
If you intend it to be a faithful reproduction, what finish, if any, did the original makers use?
Does the use of solvent lacquer, for its repairability, mean you expect to have to refinish it in your lifetime?
Do you prefer a drying oil or film type finish?
Etc.
Clint
Re: Shaker Chair Finish?
Dave Peebles Lyons, Ohio
Hi Thomas,
I have always used an oil finish on mine. Early years it was Watco, later it was Waterlox. It is also easy to repair if need be.
On your other question, I always pinned the top slat in my chairs. It seemed to me to be the only weak link in the Shaker chair. For everything else in the chair the weaved seat was pretty much bullet proof at holding things together.
Dave