Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Keller Dovetail Jig

Posts

Keller Dovetail Jig

#1

Keller Dovetail Jig

Thomas Norton

I am looking at the Keller jig but cannot seem to find any videos.

Anyone have any leads??

Re: Keller Dovetail Jig

#2

Keller Dovetail Jig   Video here link *LINK*

del schisler

here is the link for the keller system


http://www.handbooklive.com/product/248/

Re: Keller Dovetail Jig

#3

recommendation

Bill Tindall

It is a great tool for mass produced through dovetails. Very quick and reliable. Trivial set up once it is mounted correctly on backer piece the first time.

Re: Keller Dovetail Jig

#4

Re: recommendation

BilWil

I have one of the plastic models and am very pleased with it.

Re: Keller Dovetail Jig

#5

Re: Keller Dovetail Jig

Ray Newman

I have the aluminum 16" and 24" template models. 'Musta' bought 'em 25 years ago by know. The Keller works well and is relatively easy to set up.

I have not cut variable spaced dovetails with either template, so I can't say how easy or accurately that method is.

The short instructional video is well worth the nine dollar costs.

Would I purchase them again?: yes!

Re: Keller Dovetail Jig

#6

Re: Keller Dovetail Jig

FredD

You can't buy a better Dovetail jig and if your going to do frequent Dovetails , I highly recommend the Pro set which is a Pin jig and Tail jig mounted separately on four inch angle iron.

I use two routers with this setup , allowing me to quickly check set up which like Bill says is trivial.

This setup is permanently mounted to a bench , if you need a pic and are interested , I can post one for you.

FredD

Re: Keller Dovetail Jig

#7

Re: Keller Dovetail Jig

Thomas Norton

Fred,

If you could I would appreciate a pic or two.

Thanks!

Re: Keller Dovetail Jig

#8

Re: Keller Dovetail Jig

FredD

Here you go Thomas and you also Henry.

http://picasaweb.google.com/FredD17209/MyPictures?feat=directlink

FredD

Re: Keller Dovetail Jig

#9

Re: Keller Dovetail Jig

Thomas Norton

Thanks! Quick question .Where did you get the "clamps"?

Re: Keller Dovetail Jig

#10

Thanks, Fred. I assume the angle is aftermarket?

Henry Higginbotham

I don't see it on the Keller site, so I assume that was your idea.

Re: Keller Dovetail Jig

#11

Re: Keller Dovetail Jig

FredD

Clamps are furnished by Keller for that particular setup and the angle was after market Henry.

FredD