Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Appropriate wood for boat "flagstaff"

Posts

Appropriate wood for boat "flagstaff"

#1

JL

Appropriate wood for boat "flagstaff"

JL

What would be an appropriate wood for the flagstaff at the stern end of a power boat? It would be about 3 ft. long. At the bottom it would need to fit into a 1" fitting.

I have red oak, hickory, birch, cherry, walnut, hard and soft maple, mahogany, Brazilian cherry and some other woods on hand. I was thinking that red oak would have too many pores - but they could be filled.

Spar varnish is going to be used to coat the flagstaff.

Re: Appropriate wood for boat "flagstaff"

#2

Re: Appropriate wood for boat "flagstaff"

Howard Acheson

The traditional wood for the better boats is mahogany.

Re: Appropriate wood for boat "flagstaff"

#3

Re: Appropriate wood for boat "flagstaff"

paul in AZ

From that list mahogany would be the traditional choice but I like the jatoba aka brazilian "cherry". Harder, denser and less porous than mahogany.

That said, of the boats I've owned not one had a really dressy flagstick. I just never got around to keeping them varnished and looking nice.

Re: Appropriate wood for boat "flagstaff"

#4

Ellis Walentine

I'd use Ipe

Ellis Walentine

Ipe is hard as a rock, impervious to moisture, and you couldn't break a 1" ipe staff if you tried. Did I mention it has a beautiful dark honey brown color when finished?

Ellis

Re: Appropriate wood for boat "flagstaff"

#5

These circa 1941 Chris Craft might help

Gary Smyth


Re: Appropriate wood for boat "flagstaff"

#6

Re: These circa 1941 Chris Craft might help

paul in AZ

Gary: This brings back memories. Years ago the family had a Chris Smith and Sons Model One from what we guessed was the late '30s. This marque preceded the Chris Craft label and was about 26 feet LOA, -long and skinny-, w/a double cockpit, double planked solid mahogany hull powered by a big center engine Gray Marine. Same lines as the Chris Craft you posted but with a second aft cockpit. Went like stink but took half a harbor to turn around. Fun. I hope someone has kept her is the shape we did. Lotsa varnishing.

I recently built a 3 foot model of a 1940 chris craft with double mahogany 'planking' on frames. Its supposed to be a radio controlled toy but I've never gotten around to putting in the electrical guts.

Re: Appropriate wood for boat "flagstaff"

#7

Curious, did you really mean model 1

Gary Smyth

or 100? Did it look like this? Original price: $3000.

Re: Appropriate wood for boat "flagstaff"

#8

Re: Curious, did you really mean model 1

paul in AZ

That looks very much like it. It was titled as a model 1 as I remember.

There was no ChrisCraft logo anywhere and a metal cockpit plaque said 'Chris Smith and Sons'.

Unfortunately i have no photos of it.

Everything was gorgeous mahogany. The company was said to have bought a million board feet of mahogany in one of their peak years.

Re: Appropriate wood for boat "flagstaff"

#9

I'm surprised teak wasn't named

Steve Schoene

Lots of teak on boats around here, but probably need to buy them pre-made. I haven't checked but lots of teak manufactured items are less than buying the teak as lumber.

Here's one source: http://www.defender.com/category.jsp?path=-1|7504|62629&id=62767&start=01&results=10&sort=products

Re: Appropriate wood for boat "flagstaff"

#10

Re: These circa 1941 Chris Craft might help

Don Orr

I used Mahogany when I did a job for a guy restoring a Chris Craft boat.

Re: Appropriate wood for boat "flagstaff"

#11

Jesper, Denmark

Re: Appropriate wood for boat "flagstaff"

Jesper, Denmark

Teak and mahogany would be the traditional woods. It is probably cheaper to buy a redy made teak staf from a marine supply house than buying the lumber itself.

You do not describe the boart, but if it has other wood in it, such as an ash tiller or the like, it would be appropriate to use the same wodd for the staff.

5 to 7 layers of a real marine spar varnish will be needed in any case.

Re: Appropriate wood for boat "flagstaff"

#12

JL

Going to use mahogany then.

JL

I have that on hand - I'd have to go buy teak or ipe.

Re: Appropriate wood for boat "flagstaff"

#13

Good choice...

Lee Schierer McKean, PA

As I recall the flagstaffs we had on our small boats in the Navy were mahogany. You also need to consider that the flagstaff may at some point become detached from the boat and end up in the water. IPE and some other exotics don't float.....mahogany will.

Lee

Re: Appropriate wood for boat "flagstaff"

#14

Re:Not Mahogany

ThomD

Real mahogany is somewhat hard to get these days. Still out there, highly endangered. Just a heads up relative to what is sold at lumberyards.