Shaker Chair Kits?
Thomas Norton
Has anyone had any experience with kits from Shaker Workshops? I am considering the chairs for a new dining room set. I just don't have the time to try and make the chairs. But the table yes.
Thanks
Knowledge You Can Build On — Est. 1998
Shaker Chair Kits?
Thomas Norton
Has anyone had any experience with kits from Shaker Workshops? I am considering the chairs for a new dining room set. I just don't have the time to try and make the chairs. But the table yes.
Thanks
Re: Shaker Chair Kits?
Bill Earl
No experience with the kits, but the assembled stuff in their Arlington showroom is quite nice. They seem like nice folks too.
Re: Shaker Chair Kits?
John McGaw
I have six of them: 2 cherry 4-slat and 4 maple 3-slat. The quality of the kits is excellent and I have no complaints other than the price. I'd say that doing most of the fine sanding before assembly would be advisable but other than that the kits are easy. Weaving the tape seats is an acquired skill and getting everything tighter than you'd imagine reasonable is the key to doing them right. I still intend to buy two more of the kits but until I get around to building the table they are meant to go with there is no need to hurry.
Actually turning the chairs from published plans would not be all that difficult except for the fact that standard 'large' lathes with 1m between centers are not nearly long enough to handle the back legs of any of these chairs. Bending the slats would be fairly trivial with a small steamer. The back legs for some designs needs to be bent also but even these would be manageable in a small workshop.
Re: Shaker Chair Kits?
Joe Grittani
I've built 3 or 4 of their rocker kits for people over the years and have always been impressed with the quality and fit. The one time I had a problem (with a non-chair kit) their customer service was outstanding.
Joe Grittani
Dayton, Ohio