Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

NEW Shop Shots -- 935 - 936

Posts

NEW Shop Shots -- 935 - 936

#1

NEW Shop Shots -- 935 - 936

David Yoho

Our two newest Shop Shots are posted and, even if you've seen them before, they're worth another look. John and Scott did a beautiful job on their respective projects and both feature the use of hand tools. I would invite you all to visit these new shots because they represent some very fine craftsmanship and attention to details.

David Yoho

Editor - Shop Shots



NEW SHOP SHOTS!

Re: NEW Shop Shots -- 935 - 936

#2

Re: NEW Shop Shots -- 935 - 936

FredD

Those are snazzy drawers Scott . like some of my Bowling Buddies like to say , this rates a Woo-Hoo.

That design turned out well John ,though Red Oak is not my choice in Oak for furniture , you sure did a meticulous job of keeping the overall color through out and the contrast in grain selection sets it off very well.

FredD

Re: NEW Shop Shots -- 935 - 936

#3

Fred,  Thanks, appreciate comments.

John Pappas

Re: NEW Shop Shots -- 935 - 936

#4

Ellis Walentine

That was my thought, too, and a question

Ellis Walentine

You did a really nice job with a wood that is notorious for clashing grain patterns. Great work! I'm curious as to whether you found that the waste factor is higher with red oak (and other hard-to-match species, for that matter), or do you just pay more attention when selecting the boards at the lumber yard?

Ellis

Re: NEW Shop Shots -- 935 - 936

#6

Re: That was my thought, too, and a question

John Pappas

I normally keep waste to a minimum by selecting my wood carefully. On small projects I try to get all the wood in one trip. On larger projects I will make several trips to pick up wood because my small shop doesn't have a lot of storage space. However on this project, the oak was provided by the friends for whom I made the sideboard. I started with a big pile of wood, more than would be required, so I was able to be fairly selective. No waste, as the unused wood was returned to be used by my contractor friend. However, when I got to the point of making the drawer fronts nothing would work, so I had to buy some additional wood. I had a couple ideas of what I wanted for drawer fronts, and probably picked through thirty or forty boards before I found the ones I used. (And I restacked their lumber in as neat a pile as it was before I started.)

Years ago I made a liquor cabinet using red oak and while I gave some attention to grain, I did not do a good job, so it is an example of bad grain usage. I was never very happy with the way it turned out. I am currently designing a replacement and will probably use quarter sawn white oak, or soft maple. In other words, I may be joining you, Fred, and David (and others) in not favoring red oak for furniture.

And, thanks. I appreciate you kind comments.

Re: NEW Shop Shots -- 935 - 936

#7

Re: Thanks Fred!

FredD

Tell me Scott , if you know , does the restaurant in Ben Loman with the stream running though it still exist.

Many Memories of that place.

FredD