Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

More about the trimmer....

Posts

More about the trimmer....

#1

More about the trimmer....

Randy Johnson

In the course of further research about the miter trimmer I bought yesterday I have found a website that features pictures of identical (4A) models. They all look brand new. Mine looks like it has been sitting, unused, in a forgotten, dusty corner for three or four decades. No surprise there, it probably has.

However, since there is enough interest in it and similar machines I think I should add mine to the registry along with a picture. I want to clean it up first.

What is a good non-abrasive method of cleaning up decades of dust and grime from something that has so many recesses? I�m hoping someone here has a magic solvent of some kind. I would have thought that it was originally Japanned but all the ones I�ve looked at are bare metal.

Re: More about the trimmer....

#2

Re: More about the trimmer....

Howard Norman

I don't have a magic solvent but this is what I did to mine. Tore it down and washed everything in Mineral Spirits using a toothbrush. Sanded the table with an orbital sander using 600 grit sanding paper and WD40 as a lubricant. It turned out OK. I thought about trying to repaint it but I didn't easily find a suitable color in a spray can so that never has been done.

Re: More about the trimmer....

#3

Clint Searl

Re: More about the trimmer....

Clint Searl

If you want to clean it without disassembling, buy a cheap WaterPik and blast it with generic thinner or kero, which can be recovered.

Clint

Re: More about the trimmer....

#4

Re: More about the trimmer....

Howard Norman

If you want to clean it without disassembling, buy a cheap WaterPik and blast it with generic thinner or kero, which can be recovered.



Now that is an idea!!