Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

How to make a Kaleidescope

Posts

How to make a Kaleidescope

#1

How to make a Kaleidescope

Bill Tindall

I would like to make a Kaleidescope, the kind with a spherical lens at one end and I know not what inside and something(lens?) on the observation end. Anybody know how, and where to get parts.

Re: How to make a Kaleidescope

#2

Jim in Burlington Ont.

Re: How to make a Kaleidescope

Jim in River Oaks, Ont.

I made a few Kaleidoscopes years back, there used to be kits on line ?? I am trying to remember but I turned the body after drilling out the body with a forstener bit I seem to remember.... sorry that is not more informative. I do remember the mirrors were sharp..:-) ouch!

Take care,

Jim

Re: How to make a Kaleidescope

#3

Re: How to make a Kaleidescope

Dave Nichols

Kits are available from Packard Woodturning and Craft Supplies if my memory is correct

Re: How to make a Kaleidescope

#4

Re: How to make a Kaleidescope

Bill Houghton, Sebastopol, CA

Fine Woodworking had an article some years back. If you're not a member of their online service, I think they offer - at least at times - a free trial month.

Re: How to make a Kaleidescope

#5

Re: How to make a Kaleidescope

Janice Manuel

I've made a few of them, and I have the good front surface mirror you want to make them look really good.

Basically, there are 3 mirrors assembled into a triangle inside the long part of the scope. I wrapped mine in bubble wrap before I stuffed them in....

What exactly do you want to know?

Re: How to make a Kaleidescope

#6

Ellis Walentine

Re: How to make a Kaleidescope *LINK*

Ellis Walentine

My dear departed friend Steve Blenk wrote an article for us about kaleidoscopes way back in '94. Click the link below to read the article. I can't vouch for sources but you should be able to google anything you need. On another note, I have a kaleidoscope made for me by a husband/wife team in Arizona that uses bits of colored feathers in the object compartment. To change the feather arrangement, there's an atomizer bulb connected to the chamber. A little puff of air yields a whole new view. Here's one snapshot I took through the eyepiece...

Ellis




Kaleidoscope article in AW

Re: How to make a Kaleidescope

#8

Re: How to make a Kaleidescope

Yonak

I'm trying to figure out why this image is pentagonal. Are there five mirrors in this kaleidoscope ?

Re: How to make a Kaleidescope

#9

Ellis Walentine

Image geometry

Ellis Walentine

There are only two mirrors in this scope, Yonak, and they are set at a 36� angle to each other, hence ten reflections. Without getting too deeply into the geometry, it seems that the angle of the mirrors is what determines the number of reflections. Sounds like it would be fun to experiment with. Steve's scope in that article has three mirrors forming an equilateral triangle, and his images are six-sided, so the math seems to work.

Ellis

Re: How to make a Kaleidescope

#10

Re: How to make a Kaleidescope

FredD

Were I going to start , I would call J.R. Beall, for a while Jerry put out high quality kits and the last time I talked to his wife , which was several years ago , they had quit doing the kits , but she had a inventory of parts she wanted to get rid of.

She's the person who could tell you where to go , if they can't supply the parts.

Their Mirrors were first surface mirrors which give the best results

FredD

Re: How to make a Kaleidescope

#11

Re: How to make a Kaleidescope

Jennifer Indy.USA

Oooo that looks cool. I've never seen one with feathers like that. Neat photograph.

Re: How to make a Kaleidescope

#13

Jim Duxbury *LINK*

Joe Pack

A great guy, great demonstrator and great ideas. I sat in with Jim Duxbury at a NorthCoast Woodturner seminar and watched him do the basics of a gorgeous kaleidoscope. He has plans/pics available for a very reasonable cost. Check his web site at this link.


Duxbury Kaleidoscopes, etc.

Re: How to make a Kaleidescope

#14

thanks for the helpful suggestions

Bill Tindall

Would you believe there is a Forum for Kaleidoscopes! And mind numbing calculations of reflection patterns for various mirror orientations.