Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Authoritive word on hide glue working time

Posts

Authoritive word on hide glue working time

#1

Authoritive word on hide glue working time

Bill Tindall

One of the great things about IWF is the opportunity to meet useful people at companies. Like I met the product design person at Freud, for example, and a chemist from Franklin glue company. I recently emailed him about hide glue working times. I reported earlier on their other wood glues.

Franklin defines two working times:

Open assembly time- the nominal maximum time one can leave the glue exposed to air before closing the joint. Longer time leads to a dry surface that will not bond properly.

Closed assembly time- the nominal maximum time one can diddle with the joint after it is closed up . Longer time and the joint will lock up or the bond will be degraded by moving the parts.

Liquid hide glue has the longest of these two times of the glues they sell, somewhat better than "Extend". For liquid hide glue the times are 10 and 20 min for a 30 min total working time. These times will be less at higher temperature and lower humidity or lower moisture content of the wood.

Re: Authoritive word on hide glue working time

#2

Re: Authoritive word on hide glue working time

Keith Newton----Little Rock, Arkansas

Bill, Does density of the wood, or its absorbency figure in there?

I would think that a dense wood like ebony would have a longer working time than say,,,, balsa at the same MC.

I'm glad that you are sharing this info. I'm sure that you know from my previous post, that I have been using epoxy for so long, that I probably use it where others might use hide. I have to admit, that I haven't used it enough to have any good expertise with it.

Re: Authoritive word on hide glue working time

#3

Good stuff! -- thank you

ron

Re: Authoritive word on hide glue working time

#4

I am sure density is a factor

Bill Tindall

The most use of these data is for comparison. So, for example, a liquid hide glue joint can be kept open significantly longer than a for the case of regular Titebond. Or, if you need a long assembly time, as was the case in a previous post, then liquid hide is the best you can do (if you buy from Franklin).