Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Arbor shaft

Posts

Arbor shaft

#1

Arbor shaft

Doug Reynolds in Seattle

I recently changed the bearings on my Powermatic 66 arbor shaft. Is it okay if the shaft turns as I tighten the arbor nut? The nut seems to hold tight and I cannot detect any play in the shaft itself. I used threadlocker when tightening the bolt that holds the arbor shaft in place.

Re: Arbor shaft

#2

Re: Arbor shaft

Phil Joines

If you are talking about the nut that holds the blade on it takes two wrenches, one on the nut and another on the shaft.

Re: Arbor shaft

#3

Re: Arbor shaft

FredD

If we are talking about changing the blade, on my PM66 one wrench does the job and I use a dedicated box end that lives in the end of the Fence Rail.

Of course the blade is held fast by a stick, having the arbor shaft itself turn , doesn't sound right.

FredD