Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Delta planer problem

Posts

Delta planer problem

#1

Delta planer problem

Paul Woolson

Hi all, I've got a Delta "lunchbox" planer that burnt a feed belt. (I'm assuming that's what happened). Lots of burning smell, small pieces of black rubber and no feed drive.

Problem is that I can't figure out how to get the thing apart. Anyone know where I can find diagrams of this and how to find the belt?

Re: Delta planer problem

#2

Re: Delta planer problem

George Colonel's Workshop-Havertown PA

Good Afternoon Paul,

Those Gremlins struck again. My DW went dowjn last week. While I am unfamikliar whith your planer, I'm sure you can get assistance from an internet hook-up with Delta, or by calling their repair hot line. They should be able to furnish an exploded drawing once you provide them with the model number/Serial Number. Go from there.

George

Re: Delta planer problem

#3

Which model

Dustmaker Mike

depends on which model you have but I bet some one here has one like it and has done this before. I know I have at least once, and it was not that hard.

Re: Delta planer problem

#4

Re: Delta planer problem

Ken Oakley-Sunny St. Cloud, Fla.

As you face the infeed ,(front) of the planer, remove the right side cover, The belt is right there. So easy a Caveman can do it.

Re: Delta planer problem

#5

Re: Delta planer problem

del schisler

check here it may tell you something http://www.ereplacementparts.com/