Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Drill/impact driver questions?

Posts

Drill/impact driver questions?

#1

Drill/impact driver questions?

Barry Irby

I have Makita drills and an impact driver and 4 12 volt batteries. Some of these are ten or twelve years old and some are about 6. The batteries have been rebuilt once at a cost of about $200 and are dying again.

I like the size of these tools and enjoy them when the batteries are working well.

The question is: Would you have them rebuilt again or would you buy complete new sets that included a drill, impact driver, two batteries and charger?

If you would buy new ones, which ones would you buy and what battery technology would you go to?

Re: Drill/impact driver questions?

#2

Re: Drill/impact driver questions?

Scott in Montana

Hello Barry,

I kept my assortment of drill/drivers running for many years as you did. Last year however I broke down and bought most of the new Bosch compact series. Not only is it handy having only one battery size to deal with but the main reason for the change was the tool's weight and size. After a year, I am still very happy with them.

Keep in mind that these tools are basically only used around the shop and the home. In the field under commercial use, we still use 18v Milwaukee tools.

Scott in Montana

Re: Drill/impact driver questions?

#3

Jesper, Denmark

Re: Drill/impact driver questions?

Jesper, Denmark

barry,

I have had a very similar problem. Used to have all DeWalt which all could share batteries. I am now down to one professional quality DeWalt with one original battery and one replacement NiMH battery. It will stick around as longas those two batteries work.

In addition, I decided on Makita with 18 volt Lithium Ion batteries, which should last longer with the intermittant use they get.

Re: Drill/impact driver questions?

#4

Re: Drill/impact driver questions?

Joe Mohnike

If you are like me, because you like them, even if you get a new setup you will keep the old ones around, hopeing someday to find a replacement batt. and will have more tools in your way. Nothing wrong with rebuilding, or looking for an aftermarket replacement. I just replaced the batt. for a 8 or 9 year old Ryobi drill 18v and like it much more than a newer 19v crapsmen that was given to me. I decided to get 2 batts and a charger, as the equipment is old I may not be so luck the next time.

Good luck

Joe

Re: Drill/impact driver questions?

#5

Re: Drill/impact driver questions?

Andy Lincoln,in Dearborn MI

Barry,

I was faced with a similar situation about 18 months ago when my rebuilt DeWalt batteries began to fade yet again.

Rather than put the money into rebuilds I bought the Makita 18 V lithium Ion kit with teh drill and teh impact driver.I bought 2 extra 18 volt battery packs and also bought the bare tool 1/2" hammer drill,the 6 1/2" circular saw and the 4 " angle grinder as well. Each of those tools were less than $100 per tool via HD,Ebay and/or Craigslist.I bought them one piece at a time as I could afford/need a specific tool.The larger kits are nice but I could not outlay that much money at one time.

I did sell my weak,failing d Dewalts on CL with full disclosure that they were not in top shape but it prevented me from keeping them as a back up/someday repair.I love the Makita and would not look back.

Andy

Re: Drill/impact driver questions?

#6

Re: Drill/impact driver questions?

Jim H

After losing a leg I became dependent on my wife a daughter for anything over 5-6 foot. They had a hard time handling my big Milwaukee 18V, so I got the Ridgid 12V drill & driver lith-ion combo pack. They are lightweight and powerful enough I haven�t used my Milwaukee at all. Best yet the FREE lifetime service agreement INCLUDES BATTERIES, supposedly will never have to buy another set of batteries.

Re: Drill/impact driver questions?

#7

Ridgid

Dave Bair, Eaton Rapids, MI

I too got the Ridgid, but I think their warranty is bogus. You have to register by mail or online, I've done both with different drills. They have never, ever sent me the confirmation (it's some sort of key fob or something) info I'd need to have repairs or replacements done. There is no one to contact for concerns about warranty registration.

Re: Drill/impact driver questions?

#8

Kneale Brownson

Re: Ridgid

Kneale Brownson

I also sent in the lifetime bettery replacement registration and got no acknowledgement. When the batteries fail, we'll see. However, I do like the perfomance of the drill/driver and little recip saw.

Re: Drill/impact driver questions?

#9

Re: Drill/impact driver questions?

km

Have you considered this?

http://www.amazon.com/Makita-6952-2-3-Impact-Driver/dp/B000140B4A/ref=wl_it_dp_o?ie=UTF8&coliid=IMN38QSO5NAIN&colid=1BPL7A309FJBR

Re: Drill/impact driver questions?

#10

Re: Ridgid

Jim Howe

It took awhile , but I did get an acknowledgement. Only time will tell I but I do like them