Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Longest clamp that you use?

Posts

Longest clamp that you use?

#1

JL

Longest clamp that you use?

JL

I like my Rockler "Sure-Foot" bar clamps. They are lightweight, have a reasonable amount of clamping power and for most purposes suit me well. The longest that I have is only 48" though. I have a couple of pipe clamps that will go out a bit further - and of course I could always either extend those or buy longer pipes.

I was thinking about getting the "extension bar" for one (or more) of my Rockler bar clamps. Then I saw how long the bar was (48"). I can see adding another 24" to my 48" which would give me a maximum of maybe 70" or so. I don't really know if I would ever really use more than 66" or so. So I was thinking about buying one and cutting it in half and drilling the holes for the connector.

How often do ya'll use an 8' clamp? What is the longest clamp that you use as a matter of course?

TIA

Re: Longest clamp that you use?

#2

Re: Longest clamp that you use?

Bill Houghton, Sebastopol, CA

I have a couple of roughly five foot clamps that I use from time to time, but rarely more than about 4-1/2 feet worth of them.

Re: Longest clamp that you use?

#3

Re: Longest clamp that you use?

Bruce, a MN Galoot

It seems to me that I've clamped some 8' something or other rarely, for which I use pipe clamps and a connector. I have 4 4' pipe clamps that get a fair amount of use, and I've made 4-5 head boards and foot boards for beds that needed 5' and a little over.

Re: Longest clamp that you use?

#5

Re: Longest clamp that you use?

Bob Entwisle in NJ

I've got a set of pipe clamps on 5 foot pipes that I use once in a while. I think I originally got them to do 4 foot wide bookcases, way back when. (I was dumb enough to build 4 foot wide bookcases)

I've since acquired some Bessy K body clamps in 48" length but rarely need even 48"

My plan if I need more than 5 feet is longer pipes.

Bob in NJ

Re: Longest clamp that you use?

#6

Re: Longest clamp that you use?

Barry Irby

I have three pipes for clamps that are close to 8'. I keep them standing in a corner for those rare occasions. I recently used them because the 4 foot ones would not reach, but even then I only used about five feet. They were significant barriers to navigation while in use and were quickly disassembled and returned to the corner. I am struggling a bit here because I can't actually remember whether my claps are "net" or "gross", My 2' clamps are set up to actually clamp about 25", I can't recall about the rest. I have about fifteen in various lengths and try to use the shortest ones that will reach.

Re: Longest clamp that you use?

#7

Re: Longest clamp that you use?

Jim Dillon

JL,

I purchased several 72-inch Universal aluminum clamps years ago when I was working on a large cabinet and they came in very handy, especially for tweaking the diagonals to square things up. Otherwise, I don't use them much but am glad I have them. Their lightweight really is nice and I have a lot of other Universals that I use a lot and favor over the Bessys. I purchased them from "The Best Things" web site and they seemed to have the best pricing at the time. I see they now have an attachment to allow miter clamping that might be very useful.

Jim

Re: Longest clamp that you use?

#8

Re: Longest clamp that you use?

john lucas

JL for long clamps I use my pipe clamps with connectors. I have1, 4 and 5 foot pipes and several connectors. Together that gives me close to 10 feet of clamp. They do tend to flex if you put a lot of pressure on them but they've worked for what I needed long clamps for.

Re: Longest clamp that you use?

#9

Agree on the Universals

Bill Tindall

I use the 6' most often for tweaking diagonals to square up case goods, but they are also needed for head/foot boards on beds.

I think the Universals are hands down the best clamps one can buy. They were made in CA by a family. One could order case lots of 10 clamps direct from the factory and save a pile of money. Our club ordered dozens over the years. When the business was sold to the current manufacturer it was still possible to buy case lots direct. Don't know if it still is possible as I have not ordered any in a while.

Re: Longest clamp that you use?

#10

Re: Longest clamp that you use?

Stephen Kirk

I have assorted 48" pipe clamps and a bunch of 24 and 48 Besseys. My longest clamp up hadn't gone over 48. I use the 24s most often. Whenever Bessey runs a sale I grab a few more.

Re: Longest clamp that you use?

#11

Re: Longest clamp that you use?

John in NM

I'll use an 8 or 9 foot every year or two. I make them out of 2 3/4" pipe clamps, those threads on the end are pretty handy. I don't have any pipes longer than 5'.

Re: Longest clamp that you use?

#12

Re: Agree on the Universals

Jim Dillon

Bill,

Thanks for that tip on possibly buying direct. I will check it out to see if it is still possible as I use the 24-inchers (or whatever they are) a lot and would like some more. Between those and my bucket full of 6-inch and 12-inch Bessy Tradesman clamps, I can do most of what I try to cobble together.

Jim

Re: Longest clamp that you use?

#13

Re: Longest clamp that you use?

Matt Overton

Back when I was buying a clamp a month (the best way to justify buying alot of $40 clamps), I bought two Jet 96" bar clamps. They have come in very handy on many occasions. The best use was in building a very large Ipe deck. There were many places that I needed these to pull in or push out from a long distance. They saved my back many times. This is one of those tool you buy because you just know it will come in handy at some time in the future. This is one that actually did.

Re: Longest clamp that you use?

#14

Re: Longest clamp that you use?

George Colonel's Workshop-Havertown PA

Good Afternoon JL,

I was able to acquire 7 eight foot bar clamps for $5.00 each from a cabinet maker who was closing his business. I've used them on numerous occasions, but not since I gave up working commercially. I gave them all to my #3 son, an even better price. Ken does a lot of cabinet work, and these are great for squaring. I retain two of them "just in case". Normally I use Pony bar and pipe clamps in the 4 to 6 foot range for furniture work. I have a fewpairs of parallel jaw Basseys of various lengths but don't like them. I do like the Jet parallel jaw clamps.

George

Re: Longest clamp that you use?

#15

Re: Longest clamp that you use?

Barry

I never use anything longer than four (4') feet. That's the largest clamp I have. They are Jorgensen heavy-duty bar clamps. I use these only very rarely.

I have a dozen 1/2" pipe clamps with 24" pipes. That gives a capacity of about 20". I have assorted handscrews, C-clamps and smaller bar clamps. I use the smaller clamps much more than the longest bar clamps.

Seriously, the kind and size of clamps you need depends on the kinds of woodworking you do.

Re: Longest clamp that you use?

#16

Re: Longest clamp that you use?

Dave Paine

As someone else stated, it depends on the project.

I have pipe clamps with up to usable 4ft. I have couplers at the ends so I can join if needed, and this was needed for certain projects, not many, but some.

I have parallel clamps up to 30 in. These are heavy and I prefer to use the smallest which fits the item being clamped. I wish the industry made an 18in parallel clamp. I hate using a 24in unit for e.g., a 14in clamping depth.

If I were to look at frequency of use, my 6in, 12in and 24in clamps get the most use.

I have a pair of special clamps which can be screwed onto 2x4 stock. I got these in a garage sale. Sadly they are "stored" in an inconvenient place, so have never been used.

Re: Longest clamp that you use?

#17

JL

Thanks for all of the responses...

JL

I think I'll get the 4' and keep it that way. I see a bed frame in the future and it might be king sized.