Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

My new cabinet saw

Posts

My new cabinet saw

#1

My new cabinet saw

Stephen Kirk

I've had the new Jet Deluxe Xacta saw, 50", running for a few weeks now. All I can say is, how did I ever get by without a cabinet saw. There's something nice about knowing you have the power to cut anything and the saw will not bog down. The saw also holds it's settings well.

For the details, setup was straightforward but not quick. There's a lot to put together and align. I had to put some tape shims on the wings to align them perfectly (under 3 thous). I kicked the rear of the fence out just a bit as I was getting some burning on rip cuts. It was a heavy beast to unload. With three guys we still managed to drop it a little, but with no damage to man or machine. A furniture dolly is a good idea for a machine like this.

The guard is amazing. I leave it on most of the time. It's easy to see through to align cuts. With the DC hooked up I get very little dust coming off the blade. The riving knife is a great addition. It has kick back pawls, but with the riving knife I'm not sure if they are really necessary.

With the saw on a mobile base it moves quite easily. I intend to mount my router under the extension table and make better use of the space. Everything on the saw works easily. I have to turn the crank only a few times to fully raise/lower the blade. Same with bevel adjustment. And arbor lock is a very handy feature. With the extra power I find that I can keep my combo blade on most of the time.

Thats the quick scoop. It's a good saw if anyone is in the market for one.

Re: My new cabinet saw

#2

Ah, a happy woodworker

Dave Bair, Eaton Rapids, MI

Very nice machine and, gladly, a satisfied customer.

Re: My new cabinet saw

#3

Re: My new cabinet saw

Chuck Lenz

Well thats great that you can afford such a luxury in this economy. But personally I can live without a Cabinet table saw. The American made Delta Contractor's table saw that I have is wired for 230 V, and has the best dust collection for it that you'll find, it's also very accurate with the Unifence. As a hobbyist that sells some work occassionally it's really all I've ever needed in the 15 years that I've had it. An investment in a Industrial saw such as a cabinet table saw in this day and age is like I said before, a luxury, a fad, and not a neccessity. Theres not enough decent paying work out there to pay for itself, it's overkill.

Re: My new cabinet saw

#4

Re: My new cabinet saw

Howard Norman

Glad that it is working out for you. I doubt that I will ever buy a cabinet saw but who knows it could happen and if it does I will keep your comment in mind.

I added a Jessum sliding table to my 20 year old Delta contractor saw a couple of months ago. What a nice addition to the saw!!!

howard

Re: My new cabinet saw

#5

Re: My new cabinet saw

Mark Mandell - Gone Round In Jersey

Know the feeling. It is nice to be able to push 9/4 cherry or maple through a saw with a feed fast enough to prevent burning the cut.

My lefty Xacta came with a "splitter" (that was never used and might be found by my heirs) that I replaced with a drop in knife. A true riving knife would be a nice addition.

Re: My new cabinet saw

#6

Re: My new cabinet saw

George Colonel's Workshop-Havertown PA

Good Afternoon Stephen,

I have admired that very saw on many occasions, and wish I had sufficient shop room for one. I have used Jet equipment since 1999 and have been most satisfied in most all considerations, save DC in my present hybrid. As important as that is, I found the accuracy and quality of fit and finish to be plenty good to satisfy my demands. I wish you continued good luck.

George

Re: My new cabinet saw

#7

Jim Rahbe, Bedford Texas

You have every right to be proud...

Jim Rahbe, Bedford Texas

Stephen,

Congratulations on your new saw..

Don�t let the naysayers have any effect on how happy and proud you should be with your new purchase.

While it is true that some here could make a better product using a circular saw than I can using a cabinet saw, I think it a pretty lame argument that a contractor�s saw is an equal to a cabinet saw. It might be true that some don�t �need� a cabinet saw, but I suspect if they had both saws in their shop, .. the cabinet saw would get most of the use.

Too bad you didn�t get a SawStop� Not so much because you might be slightly safer, but it sure would have made this thread much more lively.. ;-)

Have fun using your new saw..

Jim R.

Re: My new cabinet saw

#8

Re: My new cabinet saw

Stephen Kirk

Sliding tables are nice additions. I'll bet that's working out great.

Re: My new cabinet saw

#9

Re: You have every right to be proud...

Stephen Kirk

Haha, I don't think we need another lively Sawstop discussion here. I found that with the Xacta guard, riving knife and dust collection this saw was plenty safe. With the guard on I can push narrow stock right by it with no worries. Not having loads of dust flying out at me is really nice too.

I worked with an 80s Craftsman contractor saw with a Vega fence. Served me fine for many years. But, I was pushing it too hard. I needed thin kerf blades to cut thick stock. Pulleys kept slipping. Motor would bog down. It had no guard, but I used a Micro Jig splitter. If I made 5 of the same cut, each piece could be a bit different. So, the cabinet saw certainly lives up to my expectations.

I'm a hobbyist who also does some commission. I'm slowly switching my shop to industrial quality machinery. My old stuff is wearing out. When it goes, I loom to upgrade. Many tools I can sell or give away so they can still enjoy more use. I like tools I don't need to fiddle with and I'm willing to pay to get it.

Re: My new cabinet saw

#10

Re: You have every right to be proud...

Dave Nichols

I've had the Jet cabinet saw for about 10 years now and wish I would have gotten it much sooner. I started out with an 8" Craftsman table saw, inherited an old 10" Craftsman, got divorced and sold it, replaced it with a new 10" Craftsman which I only kept for a year or two. Upon receiving a nice Christmas bonus I bought the Jet and have been very happy with it.