Restoration project - cleanup help
Todd
Hi everyone,
I've got a bit of a restoration project I'm working on. It's my great grandfather's buffet from sometime ~1930, and I've got my work cut out for me. I don't think it had a finish on it originally. Then my grandfather painted it. Then my parents stripped it. Then they put it in the basement, where my brothers thought it was a good place to stash all manner of stuff when they were kids. In any case, it's had a rough ride.
It's solid oak plus some oak veneer. It has some mold in it, so I wiped and sprayed (spray gun) denatured alcohol in it to try and clear that up. That's the first thing. I want to clear that up for safety. I'd like to avoid damaging it any worse, but safety comes first. Anyone dealt with situations like this?
Next comes the top. It looks like something might have been glued onto it at some point. Not sure. Anything would have happened over 30 years ago. Any suggestions on solvents to try to clear this up? Any technique advice would also be appreciated.
Also on the top, there are a number of holes, maybe from nails or pegs. I'm not sure of what to do there. I was thinking maybe of drilling them out and putting in some plugs. Probably oak rather than a contrasting wood, since the whole thing is oak. Any other suggestions about what to do here?
After I figure these things out, I'm planning on a coat or two of shellac, followed by lacquer. I appreciate any help getting there. After this would come the (hopefully easier) restoration project, my other great grandfather's table. Some pics are below. Thanks!

Bigger images on flickr. http://www.flickr.com/photos/15956122@N06/5156137211/in/photostream/



