Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Mirror Mastic removal - semi long

Posts

Mirror Mastic removal - semi long

#1

Mirror Mastic removal - semi long

Norm Knoxville

My wife asked that I remove the full wall mirror in our bath shortly after moving in in 2004. She said it dated the house and wanted separate mirrors over the sinks. Well she was out of town for a quilt show last week and I pulled the mirror with the help of a friend. I used shims and slowly pried the mastic off the sheet rock. I taped the face for safety prior to applying shims.

Once the mirror was in the shop I was at a loss to get the remaining mastic off without damaging the mirror. I needed to salvage the mirror to make the smaller units. I looked all over the internet and didn't find anything except "professional" mastic remover at your local glass shop or from internet vendors.

Well I tried all my shop solvents and none touched it. This afternoon I grabbed the Advanced auto brake cleaner and it worked like a champ. I used a cherry wedge from a leg taper and rubbed the mastic right off. We'll be making her frames before you know it.

Thought this might come in handy for someone else in the future.

Re: Mirror Mastic removal - semi long

#2

Re: Mirror Mastic removal - semi long

FredD

Norm , before you start feeling really good about the Mirror and your hard work, consider that Mirrors that have aged may not cut well , any Glaziers shop will tell you this before they try to cut it and some won't try at all.

FredD

Re: Mirror Mastic removal - semi long

#3

Re: Mirror Mastic removal - semi long

Norm Knoxville

Fred, cut down without issue. Ground the edges, all is well.

Re: Mirror Mastic removal - semi long

#4

Re: Mirror Mastic removal - semi long

Tony - Memphis

Who'd a thunk it?!? Thanks for the tip. Our house has the same (it was built in '98. I hate the wall to wall mirror look and wish I would have stopped them. Oh well. We even have outlets and light fixtures inside the mirrors. Some nice cutting by the installer!

Tony

Re: Mirror Mastic removal - semi long

#5

Re: Mirror Mastic removal - semi long

FredD

That's great , good Mirror stock is expensive and it's nice to be able to recycle one.

FredD