Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Great experience with Timberwolf bandsaw blades

Posts

Great experience with Timberwolf bandsaw blades

#1

Great experience with Timberwolf bandsaw blades

wilbur

I placed an order with Suffolk Machinery for some new bandsaw blades. Part of the order included two 1/2" 3 tpi blades. The order got to me in 3 days, which was great.

When I mounted one of the 1/2" 3 tpi blades, it cut very well, but I heard and felt a tick-tick-tick-tick-tick noise as the blade cut. Checking the blade out, I found that at the area of the blade around the weld, the tips of the teeth were protruding out a little compared to the rest of the blade. As the weld area came around, the extra protrusion made the tick-tick-tick-tick-tick that I was hearing and feeling. The other 1/2" 3 tpi blade was just perfect.

I called up Suffolk Machinery, and was connected to one of their techs. I described what was going on, and the tech felt that it was due to a slight misalignment of the blade when the weld was made. He is sending me a replacement, and I don't have to return the defective one.

That's great customer service. Thought I would share.

Re: Great experience with Timberwolf bandsaw blades

#2

Re: Great experience with Timberwolf bandsaw blade

Joseph Mulherin, Sr

Wilbur, try flattening out the misaligned teeth and it should correct the tick-tick.

Re: Great experience with Timberwolf bandsaw blades

#3

Re: Great experience with Timberwolf bandsaw blade

Bill Howatt

Glad you had a pleasant customer service experience.

I admit I'm hard on my blades usually because of trying to cut a chunk of tree trunk into a bowl blank. If I threw out all my blades that go tick-tick, I'd be cutting with a handsaw.

Bill

Re: Great experience with Timberwolf bandsaw blades

#4

Right Bill!

George Colonel's Workshop-Havertown PA

But it's nice to know what makes things tick. ;)

George

Re: Great experience with Timberwolf bandsaw blades

#5

Re: Great experience with Timberwolf bandsaw blade

paul in AZ

I recently put on a 3/4" TW blade I'd forgotten I had and found in the back of a cupboard that does more than tick -it thumps. After far too long a delay i called Suffolk. The tech talked me through several diagnostics which turned up nothing and the best bet is that the metal had acquired some memory. No surprise I guess since it had been coiled for 8 years according to their order database. I ordered another blade.

The message of value here is that it is such a rare pleasure to talk to someone who knows what he's doing; takes the time to be helpful and can make recommendations based on my needs. It sure beats talking to some order taker or simply ordering with a push of a button. And of course I like their blades.

Re: Great experience with Timberwolf bandsaw blades

#6

Re: Great experience with Timberwolf bandsaw blade

Marv

Wilbur,

Your ticking problem might be something very minor. Use some magnification and make those teeth at the weld the same as the others or at least as close as possible. A little ticking is not always a bad thing if the ticking is not causing deep kerf lines. Also, it could be cause from some unevenness on the back edge. Just file it even.

Marv