We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
I want to add a message unit to the side of the Pantry I am building. I want the message center to turn out something like the one below (just the message center, not the cabinet). What is a good backing material: I am concerned that cork will "chip" over time. If you do suggest cork, is there a certain kind/quality/thickness/etc that I should use?
Yes , Cork is the premier Bulletin Board material .
What you need is not the Cork in it's natural state, which will chip and crumble as you fear , but Cork that is ground up fine and recombined and glued to a Burlap type cloth and a quarter inch in thickness for Bulletin Boards.
Apply over a Plywood or Masonite back with or without a Frame
It comes in rolls , sometimes hard to fine and fairly expensive , but well worth the results you get using it.
Cork flooring tiles might be a good solution. You can pick them up locally or buy them online. I've used sheet cork for lots of projects, too, but the thick stuff is expensive. For bulletin boards, I usually get thin cork in a roll and laminate it with contact cement onto Homasote board.
I have something similar and used a fine grained cork designed for bulletin boards. It has held up well and if you design it to be replaceable it won't be a burden to replace it every 10 years.
I don't think it looks as good but the magnetic white board is functional. I turn cute little doodads and embed magnets in them to spruce up the white board and refrigerator.
If you want another option of being able to use magnets without the white metal panel, Lee Valley sells a magnetic paint. Apply this on drywall or any surface, then paint over to desired colour. I did this on a wall where I did not want to see a normal message board, but can use magnets to hold things up.
...is compressed cellulose fiber board, sold in 4 x 8 sheets and not expensive. It makes a great bulletin board all by itself with just a layer of fabric glued to it.
Google it; you'll find a wealth of information including where to buy it.
Homasote also makes a great floor pad in front of the workbench. Easy on the legs and dropped tools, and lasts forever. I've had the same sheet in front of my bench for the last 16 years.
frame it. Apply to a backing that will accommodate push pins(my cork was not very thick) (I used fiber insulation board ), apply this assembly to the wall and then frame with a molding piece. the molding could be applied with trim screws, or just lightly nail so it can be easily pried off.
Knew a guy who made one with coated 18ga. steel glued to a piece of hardboard. Neat thing was he used a bunch of magnets attached to dowels of varying lengths; short (1") for "I'll do it some day" to long (4") for "Stuff that must get done before sundown". He could then just look at the board to see if he'd forgotten something important or there was a message he had to read before he went for that after-work brew.