Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Walnut haul stickered and stacked

Posts

Walnut haul stickered and stacked

#1

Walnut haul stickered and stacked

Grant in Iowa

The work is done and the wait is beginning now that 616 BFt of Walnut has been stickered and stacked outside my shop.

This has been a little different than my usual selfish lumber hauls as several members of the Corridor Woodcrafters woodworking club worked together to make this happen. The 8 members involved will each take home about 77 BFt of lumber for around $25 per person sometime next year.

The thicker slabs will need additional drying, but the 4/4 stuff will likely be air dried by next fall or so.

Club members became inspired after a local Woodmizer sawyer did a demonstration of his mill at a club meeting. Then a local landowner donated some trees that were in the way of a grading project to make this possible.

It was fun and satisfing to work together and inspire those who have yet to enjoy the fruits of the logs to lumber aspect of woodworking.


Regards,

Grant in Iowa<--enjoying the smell of drying walnut each day on the way to the shop.

Re: Walnut haul stickered and stacked

#2

a fine looking stack it is

Bill Tindall

It could be a demonstration on how to stack lumber. Walnut piles do have a distinctive odor.

Re: Walnut haul stickered and stacked

#3

Re: Walnut haul stickered and stacked

FredD

Nice haul Grant , wish it was here ;-))

A couple of tips I was taught about stacking , was to keep all the same thickness boards on each level of the stack and put the thicker heavy stuff on the top levels for the additional weight which helps to keep the boards below flat.

So watch the one level to make sure all of the boards regardless of thickess carry the above stack weight evenly though out the drying process to keep the thin stock flat.

You should have some really nice lumber from that stack.

FredD

Re: Walnut haul stickered and stacked

#4

Re: Walnut haul stickered and stacked

Matt Overton

Nice stack. I have a couple of walnut stacks myself. Are the ends sealed?, can't quite tell from the photos.

Re: Walnut haul stickered and stacked

#5

Yes, with Anchor Seal 2

Grant in Iowa

Re: Walnut haul stickered and stacked

#6

Re: Yes, with Anchor Seal 2

Keith Newton----Little Rock, Arkansas

Looks great. I think I would have given a little more room between the wall side though, just for a little easier air flow through the stack.

I would like to have seen the stack higher off the slab too. If that slab doesn't have a moisture barrier under it, or rain soaks into it, the moisture from it under the stack will be keeping the air under there moist, preventing the bottom layers from getting as dry.

Congrats on the bountiful harvest.

Re: Walnut haul stickered and stacked

#7

Re: Walnut haul stickered and stacked

Scott in Eastern Iowa

Nice Stack Grant......got enough weight on top ??

Re: Walnut haul stickered and stacked

#8

Re: Walnut haul stickered and stacked

Grant in Iowa

Plenty. I added more after the photo. I have all of these fancy travertine pieces from a stairwell demolition at my old work downtown CR. Heavy stuff. Someday I might find a use for the imported slabs besides weighting down my stacks of lumber.

Re: Walnut haul stickered and stacked

#9

Re: Walnut haul stickered and stacked

Lester Gillett

Good looking stack of Walnut. I am gitting ready to mill up some Walnut Logs. Most of the logs are

in the 30" range. Going to need a lot os stickers.