Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Jack-Bench.com

Posts

Jack-Bench.com

#1

Jack-Bench.com

Joseph Mulherin, Sr

Received my plans from the inventor of this workbench and am going to be starting making it in November. It uses scissors jacks to raise and lower the bench to easier working heights.

And, when I get the bench finished I am going to be using the same idea for my Shopsmith to make it easier to work with.

Inventor: Charlie Kocoureck

Findley, MN

plans cost: about $35(tax& s&h included) www.jack-bench.com

Watch the videos and I think many of you might want to make your own.

Re: Jack-Bench.com

#2

Re: Jack-Bench.com *LINK*

Dave Paine

Nice bench. I think this would be a good project, although take a long time.

I purchased an alternate ajustable base. I built my own top. This one serves my needs. I chose not to put casters on mine. The steel plates are quite robust. Glad I picked this up at a Wood work show.


http://www.adjustabench.com/

Re: Jack-Bench.com

#3

Re: Jack-Bench.com

Joseph Mulherin, Sr

I looked at the adjustable bench earlier, but the prices are way out of my league. And the bench does not have any vises.

Over the weekend I made a model of the jack-bench and discovered that it does work as specified and illustrated in the videos. Of course I did not have any small jacks but the movements of the base and wheels does work for me.