Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

gel stain over existing finish

Posts

gel stain over existing finish

#1

gel stain over existing finish

Gerald Gibbs

Trying to put a darker colored gel stain over an existing factory finish. The furniture was not stripped. I roughened the surface with about 320 grit. I am using Minwax gel. I have a great deal of difficulty wiping off the stain so that a uniform color remains that allows some grain to show. I have consulted Masaschi's book as well as the Minwax site. I have tried paper towels, cotton cloth and a good paint brush. Any help appreciated. Jerry

Re: gel stain over existing finish

#2

JL

Re: gel stain over existing finish

JL

You probably would have better luck if you sanded the existing finish completely off or stripped the piece. You aren't really getting into the wood with the gel stain.

Other methods of changing the color would be to use a tinted finish or lacquer or to apply a glaze of some sort and then spray a finish over the glaze.

Re: gel stain over existing finish

#3

Re: gel stain over existing finish

Gerald Gibbs

Your're probably right, but the Minwax people say it can be applied over such non-porous surfaces as fibreglass and steel doors.

Re: gel stain over existing finish

#4

Agree

George@Colonel's Workshop-Havertown PA

Re: gel stain over existing finish

#5

JL

Re: gel stain over existing finish

JL

Possibly 220 grit would work better - or maybe even 150 grit and then 220 grit.

I've seen someone use it on some fiberglass, but I wasn't too impressed with the results. Usually the only thing I use on steel is paint or wax :D .