Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Any advice on a palm Nailer/Impact driver?

Posts

Any advice on a palm Nailer/Impact driver?

#1

Any advice on a palm Nailer/Impact driver?

Barry Irby

I am looking to buy a palm nailer (I think). This is the one shaped like a turtle that fits in the palm of your hand and you insert a single nail in it and it drives it by repeatedly impacting it.

I was looking at Lowes and they had a Bostitch PN 50 Mini palm nailer. ($49.95) Smaller than the ones I have seen before and that is attractive if it will handle 16 penny nails. I see it as an occasional use tool probably used mostly for installing joist hangers.

At Home Depot they had a larger version made by Rigid. It states it will drive a 16d nail. ($69.95)

There is a larger bostitch version that will drive 16d nail and also finishing nails. Slightly over a hundred bucks on line.

Anybody got one that you like or dislike? Any advice? How much air do they use?

Re: Any advice on a palm Nailer/Impact driver?

#2

Re: Any advice on a palm Nailer/Impact driver?

Big Dave

I've got a Porter Cable model I picked up a few years ago. It was a little pricier than others,but at the time, PC made pretty good tools.

I used it primarily when I built my shop with absolutely no problems. It was comfortable (with the included pad...), and was the perfect tool for those harder to reach areas that still need a nail. As for air, I ran mine off a 15gal compressor and it was never an issue...

Two pennies worth...

Dave