Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Makita power tool parts

Posts

Makita power tool parts

#1

Makita power tool parts

Wade

Does anyone have a good source of parts for older Makita power tools? I was given a real nice Makita Power Hammer / demo hammer, that had some sort of poly or soft plastic bushings to damped the bearings to the motor case, that have dried out and cracked. I sent off a few emails from doing a Google search, but I know this bunch has more knowledge then even the best search engine.

If all else fails, I will try my hand at milling up something.

Thank you in advance for any leads.

Happy sawdust making,

Wade

Re: Makita power tool parts

#2

Re: Makita power tool parts

John Veerkamp

Google "Tool Barn" they have parts for almost any tool. Quick service and reasonable price. If you can't find it on their web pages, call their 800 number. No affiliation just a satisfied customer.

Re: Makita power tool parts

#3

Re: Makita power tool parts *LINK*

Bill Houghton, Sebastopol, CA

I've had excellent results with eReplacements Parts, see linky below.

No affiliation except as a customer.


http://www.ereplacementparts.com/

Re: Makita power tool parts

#4

Re: Makita power tool parts

Frank

Re: Makita power tool parts

#5

Re: Makita power tool parts

Frank

Howdy

I have the same old Makita I think and I picked it up free because the owner said it was no good/trash. I took it apart and found the same thing you just said. But it was free to me, so I went looking for something that would fill that gap on the bearing and found a PVC fitting that fit just right on one of the sizes. This was a few years ago and I don't remember witch one it was ??? OD or ID. I sanded to the correct size and it works great. I have used it about six times and it still works great.

Frank

Re: Makita power tool parts

#6

Re: Makita power tool parts

Wade

Thanks Frank. I was at the auto parts store today for other parts, and I tried some of the heavy duty hoses that they had, but the sized did not work out at all. I like your idea of PVC and will look into that tomorrow. I am sure the PVC will outlast the original parts.

I got mine for free also, but it had been many years since the original owner used it. Once I started it, the shims just broke apart and flew out of the tool like BB's.

Like I said in my original post.....a pool of resources that cannot be matched anyplace else.

I will let you know how I make out.

Re: Makita power tool parts

#7

Rick L

Re: Gets parts directly from Makita

Rick L

It's a much simpler and better way to go. They also have manuals and parts list to down load. The other parts places have to get their parts from Makita anyway and they aren't going to be any faster or cheaper. Plus the tech help will be superior to a place that sells parts for other brands...a no brainer.

My back ground is a service tech and problem solver for the wood industry.