Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

QS white oak

Posts

QS white oak

#1

QS white oak

Dean Lapinel

Living in the NW has many advantages but not when it comes to finding common woods.

I need a single plank of QS white oak 13" wide by about 5' and I'm having trouble finding some. Any referrals? There is nothing available locally.

Dean,

Boise, Idaho

Re: QS white oak

#2

Moses Yoder

Re: QS white oak

Moses Yoder

A 13" wide quartersawn piece will have to come out of a fairly large tree, about 28" diameter minimum, unless you get a good rift cut piece. I think I would have a problem finding one here in the midwest. There are mailorder houses that specialize in such thing I suppose; maybe someone will chime in with a source. I would suggest using narrower boards and perhaps adding some type of spline oir V-groove as a design element.

Re: QS white oak

#3

Re: QS white oak

Keith Newton----Little Rock, Arkansas

I have some in my personal stash, but it is only air-dried, and well down in the stacks. If you don't find what you are after, and want to motivate me to dig into the stacks, drop me an email.

Handling those big logs that have to be quartered with a big chain-saw before I can even get them onto the mill requires a lot more sweat than the few narrow QS boards which are rendered by sawing smaller logs.

Re: QS white oak

#4

Tree size, Indeed!

Bill Tindall

The tree will more likely need to be 30" or greater as the center few inches of any tree is worthless, either due to knots or juvenile wood. They grow that big but the veneer buyers will be willing to pay more for them than you will.

Re: QS white oak

#5

Re: QS white oak

Chuck Kettler

Try Frank Miller Lumber in Indiana. Very large mill specializing in quarter and rift sawn lumber. They have a retail store.