Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

"Frenching" the feet

Posts

"Frenching" the feet

#1

"Frenching" the feet

Bill Tindall


The big chest has been turned on its head with its feet sticking up to get the French Foot. The flair is made by driving a glued wedge in, applying clamps and hoping nothing splits. The "secret" is making the kerf for the wedge just right so the piece is sufficiently flexible to conform to the wedge. It sounds so easy to say.


It pays to have lots of clamps. I just bought the Green ones from Woodworkers Supply and I am most fond of them. They are the only clamps in this size that come with pads. Why don't the other folks supply pads with all sizes of their clamps!

Next will be cutting the skirt profile and applying carved skirt and facing to the cabinet.

(It is getting heavy!)

Re: "Frenching" the feet

#2

Re: "Frenching" the feet

Brint in Richmond, VA

Pretty! What's the wood?

Re: "Frenching" the feet

#4

Progress?

Tony - Memphis

Hi bill. Not rushing you, but I'm anxious to see how you do the front of the bottom of this chest. How is it coming along?

Tony

Re: "Frenching" the feet

#5

answer

Bill Tindall

The bowed skirt is to be carved which may take a few weeks to complete. Then it will be fitted with the feet to the bottom. Will post when it underway. In the meantime the picture shows the way it is done for a flat front French Foot. The foot piece missing from the picture is flared out to the front (profile cut on band saw) to complete the French Foot


Re: "Frenching" the feet

#6

Thanks Bill!

Tony - Memphis

A lot of work in those legs! I imagine your skirt is going to be quite a challenge. I do like the look and would like to try it out someday.

Tony

Re: "Frenching" the feet

#7

The challenge is.....

Bill Tindall

...getting all the face joints to look attractive. The secret, beyond perfectly fitted joints, is grain. The facing must be plain-as-dirt grain. For this piece I selected some very slow growth walnut and sawed it almost quarter sawed so the resulting grain is simply parallel lines, closely spaced. This patter will match/blend well at the skirt miters and drawer dividers. One just works on the miters with a block plane until they are perfect.