Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Thank You/ comments

Posts

Thank You/ comments

#1

Thank You/ comments

Rick Snyder

To George, David, ans Chuck

Thank you for the advise. I could not find the BIX brand stripper, so I settled for KLEAN STRIP instead. I've used the "GREEN" stuff on small projects lately, but I find that the results are not all that great! (twice the time and work)

Thanks Again,

Rick

Re: Thank You/ comments

#2

BIX

David Yoho

Rick, around here the main place I find it is at Home Depot. If they were to stop carrying it, I'd have to look around for another source. I tried the brand you mentioned before but was not as happy with it as the BIX. Good luck with your project and let us know how it went.

Re: Thank You/ comments

#3

Re: Thank You/ comments

FredD

If your strippin process is fairly flat , like horizontal , after you brush on the stripper , cover it with Surround Wrap ,especially if the stripper is solvent based.

This will hold the product in place longer without rapid drying and therefore you get more bang for the buck in a manner of speaking.

FredD