Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Caster problem fixed

Posts

Caster problem fixed

#1

Caster problem fixed

Stephen Kirk

The problem was that when the hinged plate was lowered the plate of the caster wasn't parallel to the floor. The hinged plate is about a 15 deg angle so I put some 15 deg wedges under the caster and now all is fine. I had to recess the wedges into the plate to maintain my clearance.

Thanks for the suggestions on what to look for! I'm rolling now!