Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

? on finishing hardwood floor

Posts

? on finishing hardwood floor

#1

? on finishing hardwood floor

William Bishop

Hi, I read an article by Jason Steward about burnishing a floor, long story short is that I have a floor, maple, that has been sand to wood and finished with fabulon satin waterbase and hand sanded with 240 grit as I'd intended to give it one more coat however the home owners want the smooth sanded finish. There is plenty of finish on the floor, I can see the almost polished look but I'm not sure what my next move should be. Is there something I can use to rub it out with? or maybe sand it with 6 or 800 grit wet? Any suggestions would be appreciated. I took this job after the floor refinisher walked out as he couldnt get the streaks out or finish to lay down. I've painted cars for 30 years and have always refinished antique furniture on the side although this is my first floor.