We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
I had need of some 3/4 ACX for the theatre. I went to Home Depot.
The ACX is from South America. The "A" side was clean. The "C" side looked better than some "A" sides that I've used. I used my router on one edge - no chipping and a clean edge. I did not find or see any voids in the pieces that I cut.
I am tempted to go stock up on some. Of course there is the perennial problem on where to put it.
It is interesting with sellers who stock their products based on low bids (as I presume Home Desperate does) - every once in a while, the low bidder turns out a quality product.
Locally, we have a Home Desperate and a Lowe's within two miles of each other. I know in parts of the country, there's also Menard's, which may be competing in some markets with one or both of the first two. I've had the impression that our local HD and Lowe's have been trying to compete on quality and not just price, somewhat.
I still buy my lumber and ply from the local contractor's lumberyard. Way better consistency, and they have the specialty trim stock and suchlike that I need in working on our Queen Anne house; and their prices are competitive.
Last week I bought some 3/4" birch ply @ Lowe's. The 'a' side is absolutely clear cabinet grade with a birch face layer a full 1/8 inch thick. The internal plies are comparably thick -I think its 7 ply- so it isn't like Baltic but I have found no voids or compression irregularities. The back is 'c' that has been largely filled. A full 4x8 sheet was about the same price as 5x5 foot baltic birch.
Nice to have a thick face layer where I don't have to wonder about sanding through.