WE MOVED...
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Dado blade set sharpening question.

Posts

Dado blade set sharpening question.

#1

JL

Dado blade set sharpening question.

JL

After many years of use, I find that I need to sharpen my dado set - or at least some of it. Most notably the outer blades and a couple of the 1/8" blades. Some of the other blades have not seen much use (some haven't seen any).

With that in mind - should I just sharpen the blades that need it? Or should I have all of them sharpened? My thought was to insure that they all have a similar geometry. The cost to sharpen is $0.25/tooth.

Thoughts, opinions please.

TIA.

Re: Dado blade set sharpening question.

#2

Moses Yoder

Re: Dado blade set sharpening question.

Moses Yoder

A dado blade set needs all the blades sharpened each time so that they are still the same radius. Sharpening removes a small amount of the tooth and the ones that aren't sharpened will be higher, causing an uneven groove.

Re: Dado blade set sharpening question.

#3

Re: Dado blade set sharpening question.

Jesse Cloud

Moses nailed it. Sorry.

Re: Dado blade set sharpening question.

#4

JL

I had that feeling.

JL

So it will be a few dollars extra.

Re: Dado blade set sharpening question.

#5

Re: I had that feeling.

Joseph Mulherin, Sr

JL, as compared to having the blades sharpened or buying an entirely new set of blade set....what might be the difference??

Re: Dado blade set sharpening question.

#6

Re: Dado blade set sharpening question.

FredD

The standard way to grind Dado blades is to sharpen them all each time and the inside chippers ground 1/64th of a inch shorter then the outside blades.

That is the configuration when they were new and results in a tiny groove on each side of the cut.

FredD

Re: Dado blade set sharpening question.

#7

JL

Re: I had that feeling.

JL

Outers - 2 blades at 30 teeth each = $15.

Chippers - 4-6 teeth on 12 blades = ~$15.

Total - $30. New set of dado blades $60-120.

I think I would rather have them sharpened :D.

Re: Dado blade set sharpening question.

#8

Dale Lenz

You can request...

Dale Lenz

a "totally" flat bottom cut, at least from Forrest. When I ordered my Forrest dado set I had them grind the outside blades the same as the inside cutters, as my splines on my flag cases show and wanted the sharpest looking spines or keys as I could get. After hundred to thousand of splines, I'm glad I chose the flat bottom grind, even if 15 thousand isn't much, don't have a glue escape problem.