Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Support Beam Calculator ?

Posts

Support Beam Calculator ?

#1

Support Beam Calculator ?

Yonak

I'm having a carport built and I would like to independently find out how large a beam I need to support the roof over a 24 foot span. Is there a calculator that can help me figure the weight of the roof and the size of beam needed ?

Re: Support Beam Calculator ?

#2

Re: Support Beam Calculator ?

FredD

I don't know where you live , but California which pretty much is in the lead on Structural requirements, requires a Structural Engineer to sign off on spans over 24 feet.

Span table books should be available in your library , certainly in the Building Dept.

FredD

Re: Support Beam Calculator ?

#3

Clint Searl

Re: Support Beam Calculator ?

Clint Searl

The folks who make beams and trusses have load specs.

Clint

Re: Support Beam Calculator ?

#4

Re: Support Beam Calculator ?

Joseph Mulherin, Sr

Yonuk, try this website for some calculations you might be able to make:

www.engineeringtoolbox.com

Re: Support Beam Calculator ?

#5

Ellis Walentine

Re: Support Beam Calculator ?

Ellis Walentine

The minimum section modulus of your beam will depend on the span, the total weight (live and dead loads), how and where the weight is distributed over the beam, the species of wood, its modulus of elasticity and fiber stress in bending, the allowable deflection, plus any safety factor or aesthetic consideration you might want to add to the equation. Back when I was running these calculations on a regular basis, I found the information I needed in a book called "From the Ground Up," a DIY shelter manual published in 1976.

Regardless of who figures out your beams for you, you'll have to have the plans approved by your municipality's code officer before you can build.

Ellis

Re: Support Beam Calculator ?

#6

Re: Support Beam Calculator ?

Richard McComas

http://courses.cit.cornell.edu/arch264/calculators/example8.1/index.html