WE MOVED...
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Latest Project

Posts

Latest Project

#1

Latest Project

Bartstar

Here is a picture of my latest creation. Its a serving tray I made for my step dad. Its made from Walnut burl and Zebrawood. The tapered, locking dovetail splines are made from Cocobolo. This was my first attempt at any sort of carving - I found a dremel came in real handy :D

Regards

Bart


Re: Latest Project

#2

Re: Latest Project

FredD

Great piece Bart , the Burl is a knockout and I really like the handle design..

FredD

Re: Latest Project

#3

Ellis Walentine

Wonderful

Ellis Walentine

The colors and the figures of those two kinds of wood go together quite well, Bart. Nice job!

Did you reinforce the short-grain part of the handles somehow?

Ellis

Re: Latest Project

#4

Great Looking and I want to know????

Barry Irby

How did you do the tapered locking dovetails?

Got a tray coming up soon, thanks for the inspiration.

Re: Latest Project

#5

Re: Wonderful

Bartstar

Hi Ellis - that's the same question you asked me on my last tray. No - I did not - but am considering that perhaps for future attempts. The handles do feel quite sturdy though.

Regards

Bart.

P.S. Thanks for fixing my profile problem!

Re: Latest Project

#6

Re: Great Looking and I want to know???? *LINK*

Bartstar

I used to use just 1/8"-1/4" miter splines, and found them a bit wanting. Then, many years ago I saw a posting for the Kehoe jig. I purchased the jig and put it aside for about 4 years, not having the time to learn how to use it. I finally found the time and absolutely love this system. Its fairly easy to use. But the Charles Nell video on their site is invaluable for learning.

Regards

Bart


Dovetail Spine Jig

Re: Latest Project

#7

Re: Latest Project

Bartstar

Thanks Fred! The handle design was an inspiration - Last time I made a tray I did just a simple loop and wanted to do something a bit fancier. Glad you like it.

Regards

Bart

Re: Latest Project

#8

That's funny....

Barry Irby

I bought a Kehoe jig ten or twelve years ago at a WW Show and dropped it, still in the bag in a corner of my shop and almost forgot it. Recently someone here suggested the Kehoe jig as the solution to splines for a couple of cabinets I was building. Pulled it out and used it for splines. It worked great. The splines are tapered about one degree and you can drive them up nice and snug. Takes a little effort to cut the splines just right, but once you get the setup you can mass produce them. Have not tried it with the dove tails yet, but I think they would work even better.

Just funny that after about twelve years this comes up twice in about a month.

Re: Latest Project

#9

Re: That's funny....

Bartstar

Sure- You can make tapered regular splines or dovetails - To make dovetail splines, you just need to tip your saw blade to the same angle as your dovetail bit. The rest is essentially the same I assume.