WE MOVED...
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Kudos to Rikon

Posts

Kudos to Rikon

#1

Kudos to Rikon

Barry Irby

I have been working on my Rikon Belt/Disk sander Carl gave me. (Thanks again Carl) I ordered some parts from Rikon. One of them was a pin that goes through the "bridge" that serves as a stop on the belt. They sent me a small box of parts but failed to send the rod. (I did not know what was missing until I looked at the one at the WoodCraft store the other night.) They sent the two knurled knobs for the end of it, but not the rod. Just called them and they said OOPS and are sending it out right away, No Charge. I appreciate that. I would have happily paid for it and the shipping, but they refused payment. It's only a couple of bucks, but I like the fact they stepped up and did not gouge me.

Re: Kudos to Rikon

#2

Re: Kudos to Rikon

paul in AZ

Thats good to hear in this day and age. Specially from someone whose prices are not high end.

I had a similar experience with my brand new Jet 18" bandsaw. The fence was wonky. When I called they hardly gave me a chance to explain the trouble -it was "whats your address" and they overnight expressed a new fence and didn't even want the other one back. That was around 6 years ago. They were equally good when I ordered a new wheel bearing a few years later. I hope they haven't changed cause I'm about to look at what sounds like a semi-virgin Jet shaper.

Re: Kudos to Rikon

#3

Re: Kudos to Rikon

Dave Peebles Lyons, Ohio

Hi Barry,

Same result for me. I had bought one of their bandsaws. The 10-325 14".

I had some problems with the motor loosing power right after I got it. I did some research about the problem and found a post right here on this forum about the same thing happening. Sorry I cannot remember who it was. :) but thank you again!!

Long story short, I called and spoke to Rod, and next thing you know a new motor was on its way.

I asked if they wanted the old motor returned, but they said just keep it.

Great service goes a long way with me. They did what they were supposed to do. Not many do these days.

By the way, it has been running perfectly for over two years.

Dave