WE MOVED...
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

*** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

Posts

*** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#1

Ellis Walentine

*** SURVEY:  THE IDES OF SEPTEMBER *** *LINK*

Ellis Walentine

Clint Searl asked a question yesterday that I think is a classic Ides survey question. In case you're new here, the Ides surveys are conducted on the "ides" of every other month. We ask questions about your woodworking preferences and opinions and publish the results in Woodworker West magazine.

Clint's question is simple and universal, and wide open to interpretation:

"What is your favorite wood and why?"


Don't hold back. Tell us what you really think, and thanks for participating.

Cheers,

Ellis Walentine, Host


Woodworker West Magazine

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#2

Moses Yoder

Re: Cocobolo

Moses Yoder

I like cocobolo. It is oily so it can be polished to a high sheen, it smells like carrots when it is being turned or cut, and I love the rich reddish color. I made a fountain pen out of cocobolo that everyone wants to steal from me; I have to keep my eyes on it :b I like using cocobolo for accents like wedges and butterfly keys or door pulls.

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#3

hickory - burned down to coals

DizD

and put in a pit with a whole hog for about 14 hours. Best thing going.

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#4

depends on the project and what is available

bill tindall

I have built furniture pieces from Ash, Maple, Cherry, Walnut, Mahogany and White Oak in the past 2 years. The wood choice was dictated by the style of the piece- rift cut ash for the Krenov style piece, mahogany for a Federal cabinet, walnut for a Chester County chest of drawers, etc. I wonder to what extent people's "favorite wood" really depends on their "favorite style" of building. I can't imagine anyone that was smitten by Stickley furniture choosing maple as a favorite wood, or anyone whose favorite wood was cherry building Stickley.

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#5

Re: *** SURVEY:  THE IDES OF SEPTEMBER ***

steve mackay

Oak. I prefer red but white will do. Its uiversal and has always done what I've asked it to do with little or no resistance. It can be fashioned into an indestructable childs wagon (Oh, Baby !) or fine fret work. Between the two flavors it will fit into almost any "decor". Its very strong and very stable. Its forgiving. For the accident prone child, what is a ding in oak would have been a gouge (or worse) in most other woods. It can be worked hard with a Timesaver or caressed with a card scraper. Everyone trusts it, knows it and admires it. Start explaining exotic woods to the layman and eyes start to glaze over. Mention oak and there is instant understanding in those same eyes.

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#6

Clint Searl

Re: depends on the project and what is available

Clint Searl

Restricting the choice of wood to the style of furniture seems claustrophobic to me. I've made Stickley out of walnut, G&G out of white ash, and tansu out of cherry and oak. Check out stickley.com for many pieces in cherry.

Clint

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#7

Re: *** SURVEY:  THE IDES OF SEPTEMBER ***

Jim Toews - Walla Walla, WA

Walnut. There is a hardwood dealer in town who purchases local trees and saws them into lumber. He then uses a combination of air drying and finishing in a kiln that dries the wood but does not smear/blend the colors. I love working this stuff, which I purchase rough from the saw, and discovering the wonder of figure and color revealed by my tools. The wood is a joy to work, and it gives off an aroma that I find quite pleasant. With an appropriate finish the depth and beauty of the wood can be stunning. Walnut is a gift from nature to the woodworker, and one I appreciate with all my senses.

Cheers!

Jim

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#8

Re: *** SURVEY:  THE IDES OF SEPTEMBER ***

mamc

Cherry,

Excellant workability,great weight yet durable for projects large and small, realitively easy to get a great finish even if your finishing skills are not the best,and the results whether you finish to a natural tone, allow the cherry to darken over time, or take it right to the classic rich dark right away are always excellant.

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#9

My favorite wood is---

Doug Ridley

central-- because there is so much info available on it.

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#10

In addition

bill tindall

Availability enters the picture. When it came time to build a Krenov piece pear wasn't considered, although it seems to have been a favorite Krenov choice. I have no idea where to buy pear and probably would not have chosen to spend the money for it if I did. Ash is available locally, and in a close grained rift cut it is an ideal choice for the Krenov style. I was at the College of redwoods one time and most of the pieces under construction has some unfamiliar to me wood in them in some application or another. It was explained that a tree had become available, the attractive wood had useful properties and the frugal students used it.

The bottom line is: like "form follows function" I'll say "favored" rather than favorite follows form, when the price is right.

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#11

Re: *** Cherry

Nicholas Tuzzolino

The final finish is wonderful to touch and seems inviting. The patina it gathers with age is also appealing, especially with family heirlooms that I make.

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#12

The Colonel will be envious

bill tindall

that you came up with this one!

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#13

DO-MESTIC

Mark Mandell - Gone Round In Jersey

There are, of course, so very many wonderful woods from around the world, but, whether turning or building furniture, my preferred woods are all domestic. That translates to Walnut, Cherry, and Maple. Don't like oak (white,black, or red) and ash runs a close fourth in the "no thanks" list. Dogwood comes in high for accents as does Mesquite. If this were on the turning board, I'd drop Cherry and put in Mulberry as I done several salad sets in that lovely yellow-to-warm-brown wood that can't be beat for treenware.

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#14

Re: *** SURVEY:  THE IDES OF SEPTEMBER ***

Jim Follette in Fayetteville, NY

Exotic: mahogany-> glues well, machines well takes a beautiful finish without a lot of effort

Domestic: black walnut-> pretty much the same, just not as rich looking as mahogany

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#15

JL

Re: *** SURVEY:  THE IDES OF SEPTEMBER ***

JL

Again - hard maple. Grain, hardness, workability. It takes a great line and has good structural strength. I can have a baluster style leg with a 5/8" thick cross-section and I know it is going to hold and well.

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#16

No votes for poplar?

Bill Tindall

When we sold lumber it was everyone's favorite wood for drawers, internal furniture parts, painted stuff. It's easy to work, dries well, quality is always good, available in good lengths and widths, cheap. Sold way more of it than anything mentioned so far, except red oak.

In terms of our sales it was Red Oak> Poplar> walnut>cherry and a piddly amount of maple, birch, ash, basswood and white oak. We carried 500 bdft of mahogany in inventory through most of the 1980's and hardly sold a piece of it. Finally fire-saled it to someone restoring a boat. No body was doing period work in these parts back then. Wish I had it now.

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#17

Balsa

Neal in San Jose

I thought that would get your attention! Back in my misspent youth, I built many, many model airplanes. The feel and lightness of that wood brings back pleasant memories!

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#18

Dale Lenz

Holly

Dale Lenz

Have had the opportunity to make a fire place mantel and a few smaller pieces out of holly lumber. Holly hand planes like a hot knife through butter. Wish I had more orders and a stable supply of holly. I've even dried holly with no staining. Actually, did not know holly was a problem turning blue/gray, just lucky that I dried the holly during the winter months.

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#19

I'll go with walnut overall...

John in NM

It has all the properties I like individually in other woods, all in one board.

I like the smell (like cherry and maple)

It looks great either plain or figured, and the figure can be fantastic (like mesquite, koa, and other exotics)

Its well behaved overall, doesn't seem to pinch saw blades, works well with hand tools, seems stable.

Its even a bit decay resistant, though not in a class with locust et al.

The only thing I don't like is how it fades in the sun, or after years of general light exposure. But most woods do that, so I shouldn't hold that against it :D

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#20

Cherry for the reasons stated below.

Lee Schierer McKean, PA

Just in case previous answers don't count. I like cherry because of the way it works and finishes. The color gets better with age and the silky smoothness it will sand out to is very finger appealing. You just can't walk by a piece made from cherry without touching it.

Next would be maple because it works nearly the same and is much more affordable.

Hickory is probably the best smelling wood while working with it.

Lee

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#21

Balsa Wood.

Thomas Skaggs, Foothills of Mount Level

I have switched from Cherry to Balsa. That way I can build a china cabinet and it will not weigh over 10 lbs. ;-)

T.