Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

finishing cherry

Posts

finishing cherry

#1

finishing cherry

Joseph Schober

I recently stripped a cherry table( sanded to raw lumber) and came up with mostly heartwood and some sapwood. I would like to keep the overall color of the table as light as possible. Is there a way to blend in the sapwood reasonably well and keep the natural cherry color throughout. Thanks in advance

Re: finishing cherry

#2

Re: finishing cherry

paul in AZ

This seems to be the day for cherry.

I have been told by furniture makers that sapwood in cherry is not considered a detraction.

While I try to avoid it I have 2 of my pieces in my bedroom plus my bathroom cabinets that have some sapwood. Given some time the sap mellows to a honey color and I don't find it objectionable at all. These were finished in my usual way with boiled linseed oil and poly over that. I don't know how non-oiled sapwood would turn out but suspect it would work much the same -only slower.

Re: finishing cherry

#3

Clint Searl

Re: finishing cherry

Clint Searl

Why? The variation gives the piece personality. Latex wall paint will guarantee an overall even tone.

Clint

Re: finishing cherry

#4

Re: finishing cherry

George Colonel's Workshop-Havertown PA


Good Evening Joe,

If you look closely at the bottom of the cradle side you can see the sap wood I included. I believe the whole piece retains the cherry flavor, and the sap wood highlights it. Naturally, I've taken some pains not to include sap wood in vast areas. My finishing schedule of shellac, naptha and poly did not include any stain or dye, just sun light, and a few years worth of grandchildren. Eva is the third one for this particular cradle. No matter what you do initially, cherry just gets better with age.

George

Re: finishing cherry

#5

Re: finishing cherry

Joseph Schober

Thanks for all your answers. Being a painting contractor for thirty years I particularly enjoyed the reference to latex paint. Frankly, I'm OK with the color variation, I just wasn't sure if it would be a major faux pa to just finish it as is. I didn't want a whispering campaigne going on behind my back by any furniture critics who happen to have dinner at my house. But one of your answers did intrigue me. I was planning on using Zip-Guard satin original formula for the finish, which will amber it. Whats the reason for using boiled linseed oil for the first coat. Again, thanks in advance, Joe

Re: finishing cherry

#6

Re: finishing cherry

paul in AZ

I use BLO to not only bring out the color that would take a year or two to develop without it but it accentuates the grain pattern.

I also agree with the comment that bits of sapwood can add character to a surface.

BLO plus [usually] some poly has been my standard finish for cherry for 30 odd years. And some of the other things I've tried did indeed turn out odd.

BUT... as George pointed out in the thread below there are other ways to skin that cat. It wouldn't be fun if there was only one "right" way to do something. Whatever gives you the result you like.

Best thing would be to try a bit on a hidden area such as the underside of the top to see if you like it or which technique you want.

Re: finishing cherry

#7

Re: finishing cherry

FredD

George, that youngster looks a lot like you ;-))

FredD

Re: finishing cherry

#8

Clint Searl

Re: finishing cherry

Clint Searl

BLO adds nothing but a tendency to muddy the natural beauty of cherry. NC lacquer is all that's needed to illuminate the figure and make a durable finish.

Clint

Re: finishing cherry

#9

2nd that  lacquer works very well

del schisler

Re: finishing cherry

#10

Re: finishing cherry

Jesse Cloud

+1 for leaving the sapwood as is.

If you really feel strongly about evening it out, you can put a coat of dewaxed (zinser bullseye seal coat) shellac on, the apply a glaze of reddish brown to the sapwood, feathering onto the heartwood, rubbing off excess after its dry, then another coat of shellac. Repeat as necessary.

The risk in this is that as cherry darkens with age, the glazed areas will darken at a different rate - so what looks pleasing now, may look less so in a few years.

Re: finishing cherry

#11

Re: finishing cherry

Joseph Schober

Thanks to everyone for there input. Probably a little unnecessary fretting on my part but happy to get valuable suggestions from seasoned woodworkers, Joe