Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Flag Case

Posts

Flag Case

#1

Flag Case

Ed Freestone------WebKitFormBoundaryiliP7S+oBWEY3G

My wife's father passed away recently and I'd like to make a triangular flag display box for my mother-in-law. I could guess at the basics of design and construction but actual plans or other advice would be much appreciated.

Thanks,

Ed.

Re: Flag Case

#2

Dale Lenz

Ask, away

Dale Lenz

I've built a few...Won't be back until after 6 PM CST tonight.

Re: Flag Case

#3

Re: Flag Case

James Fox

Ed, I've got a couple of different plans I've been saving. I'd be glad to send you a copy. Just send me an e-mail to the above address. I'm baby sitting the grand kids today so I'll be a bit busy :D , but I could get them to you tomorrow.

James

Re: Flag Case

#4

Re: Flag Case *LINK*

Grant in Iowa

Hi Ed,

I have built several flag cases in the past. One thing is sure, you will need to cater the dimensions for the flag that was presented, as flag sizes and thickness vary enough that there is no standard size once folded.

Below is a link to another post I made on the subject from 2007.

Here are some photos of another one I made a couple years ago:








You should be able to learn a great deal about the construction by studying the photos.

Here is a drawing of the moulding cross section. You may need to adjust the depth of the moulding in order to fit your flag.




Link to another post from 2007

Re: Flag Case

#5

Re: Flag Case

John Lucas

There were plans in Wood Magazine quite a few years ago. I built one from the plans. Can't say what year it was however. You might be able to do a search on their website.

Re: Flag Case

#6

Re: Flag Case

Ed F.

James,

I couldn't figure out how to email you so I'm replying here. My email is ejfree@verizon.net.

Thanks,

Ed.

Re: Flag Case

#7

Re: Flag Case

steve mackay

The burial flag is the larger of the two "Storm" flags. The other, smaller used for retierment cerimonies / presentaion. For the burial flag I use 59" x 41" x 41" with 90 degrees on top and 22.5 degrees on both ends. As far as daddos, groves and such for the glass and back panel . . . these are endless. Do a Google and look around for a profile design that will work with the tools / machines you have on hand. And remember . . . GI folded that bad boy REALLY tight. Make sure you make PLENTY of depth in the case in case someone ever takes it out, flys it and refolds it looser. And check for FIVE stars (all in line, nice & neat) BEFORE you seal up the back panel. If they gave you the brass amunition casings be sure to fold them inside the flag so they don't rattle around.

Re: Flag Case

#8

Sorry . . .

steve mackay

Its 45 degrees and 22.5 degrees on the ends of each piece.