Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Rcent project - cutting board

Posts

Rcent project - cutting board

#1

Rcent project - cutting board

Dave Paine

Activity seems slower than normal, also people like to see pictures, so a quick post of a recent project.

I had given this board to the daughter of my neighbor as a house warming gift.

This was a quick "recycle" of my first attempt at a cutting board. I used what I later found out to be soft maple. The board split and was relegated to my dust pile. This year I decided to recycle to other projects. This was the second project. Outside is Padauk with center or Rosewood.


My neighbor then asked if I would create a board as a wedding gift for the sister of her daughter in law. This was the result.

A piece of hard maple was the core. An inlay of rosewood, bubinga and lacewood with end so black walnut end grain up and sides of purpleheart. I did not know at the time but the bride's favourite colour was purple.


Re: Rcent project - cutting board

#2

Very purdee!

Marv

Re: Rcent project - cutting board

#3

the boards have a problem

Bill Tindall

......they are so pretty the owners won't cut on them.

Re: Rcent project - cutting board

#4

Re: the boards have a problem

Brint in Richmond, VA

I have to agree. ;-) Although I can imagine cutting on the first one in a pinch, no way would I take a knife to the second one - it's beautiful!!

Re: Rcent project - cutting board

#5

Gotta agree.

John E in SC

Much too pretty to use, particularly the 2nd one. Will look great sitting on the counter though! :)

Re: Rcent project - cutting board

#6

another fate

bill tindall

I made a board for a friend, not near as elegant as these, and they turned it into a wall decoration. It looked good hanging in the kitchen. Eventually they relented and cut stuff on it.

Re: Rcent project - cutting board

#7

Re: the boards have a problem

Dave Paine

Bill. thanks and you are correct, most people have said "too pretty to cut on".

This was the board before these two. The wife of the recipient sent me a thank you note stating she would never cut on this.


Of my recent boards, this is the only one the recipient is using to cut on.

Recipient is son-in-law of a friend who assists in my projects. Pictures before oiling.

This is the designated cutting side.


This is the decorative side.


Re: Rcent project - cutting board

#8

Well, thats a slick idea

Bill Tindall

It could be hung on the wall for decoration and removed as needed. I like multitaskers.