Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Lacquer over Lacquer question

Posts

Lacquer over Lacquer question

#1

Lacquer over Lacquer question

Barry Irby

I have been working on a bed for my son and DIL. He has been finishing it. Brushing on Deft Lacquer and hitting some spot with the same stuff out of the spray cans. He has gotten overwhelmed and a friend of mine who has a cabinet shop has agreed to help finish it.

So the question is, can you spray Gemini Pre-Cat Lacquer of Deft Lacquer? Will it bond?

Re: Lacquer over Lacquer question

#2

Re: Lacquer over Lacquer question

del schisler

I used to use deft lacquer out of the can's yrs ago. It is very soft finish as i remember. I use M.L.Campbell precat simi gloss now. I use a HVLP spray unit now with what i call perfet coat's . This a cabnet grade which the finish is hard. I don't belive you will have any bonding trouble. What i would do is see if the finish that is on their now is soft. like can you use finger nail and put a mark or rake some off ? Do this where it wouldn't show on the back side of a leg ? If it come's off. The top finish i belive will not bond real hard. Sence i haven't worked with deft for a while. They may change the mix so it would be hard. Their may be a curring time for this tyoe to set up. I would call the deft co. and see if you get a smart person ? on the curring time . good luck

Re: Lacquer over Lacquer question

#3

Re: Lacquer over Lacquer question

Howard Acheson

You need to be careful when mixing finishes particularly, two-part finishes like pre-cat. I recommend you contact the manufacturer and ask them the question. As I recall, Campbell has a web site and you may find your answer there.

Re: Lacquer over Lacquer question

#4

Re: Lacquer over Lacquer question

FredD

It most likely will bond , or burn in , how well is another matter.

The easy fool proof way is to spray a good brand (Gemini is one) of Nitrocellulose lacquer , that is what Deft is. That was the Lacquer of choice of years and still is a good finish.

FredD

Re: Lacquer over Lacquer question

#5

Re: Lacquer over Lacquer question

Dick Coers

I'd be careful with this one. I think it has some additives, besides all the retarder, that makes it flow out from brushing. Maybe if he applies a good sealer first as a barrier coat.

A good friend of mine built a fantastic walnut desk with lots of coats of rubbed out deft. He put a vinyl desk saver on it to protect that top. That vinyl desk saver melted into the deft and was a mess. He also made a doll craddle. The foot of the doll melted into the deft and ruined the favorite doll and the didn't do the craddle any good either. I haven't used any deft since he showed that to me 15 years ago.