Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

IWF report- Colt drills, awesome!

Posts

IWF report- Colt drills, awesome!

#1

IWF report- Colt drills, awesome!

Bill Tindall

I don't have words to describe how fast these products drill through wood. The company sells both Forstner and brad point. As a demo the booth person drilled end ways about 30" through a wet poplar log section in about 1 min with a 1 1/2" Forstner bit. Second, he drilled the hole in a pen blank in maybe 5 seconds with one of their brad points. The drills are M2 tool steel and something about the chip breaker is the secret to their drilling speed. The chips don't clog up in the flutes.

I don't know where they can be bought but I suppose the web site may offer suggestions Colt-tools.com

Re: IWF report- Colt drills, awesome!

#2

Re: IWF report- Colt drills, awesome!

Richard McComas

Infinity tools has them.

Re: IWF report- Colt drills, awesome!

#3

Re: IWF report- Colt drills, awesome!

Nelson

Woodcraft sells them,and they are great bits.

Re: IWF report- Colt drills, awesome!

#4

Questions

Thomas Skaggs, Foothills of Mount Level

How clean are the holes? How flat are the bottoms of the holes? Just curious. Thanks

Tom

Re: IWF report- Colt drills, awesome!

#5

Not sure

Bill Tindall

I was in such awe of the cutting speed that I failed to look at the finish. I think I would have noticed if it was ragged. The configuration of the Forstner was such that I think it would leave a flat bottom hole. All that differed was some doodlies that broke up the chips as they were cut.

Re: IWF report- Colt drills, awesome!

#6

Jim DeLaney, Austintown, Ohio

Re: IWF report- Colt drills, awesome!

Jim DeLaney, Austintown, Ohio

Lee Valley and Infinity both sell them.

Re: IWF report- Colt drills, awesome!

#7

Re: Questions

Richard McComas

Tom, if you go to the Infinity tools website they have a video of the bit in action. Look like they cut clean flat bottom holes fast.

Re: IWF report- Colt drills, awesome!

#8

Re: Questions

Nicholas Tuzzolino

I have used these Colt bits on a pepper mill. The cuts are fast, and smooth as silk Clean bottoms, too. Love'em.

Re: IWF report- Colt drills, awesome!

#9

Good to know.  Thanks

Thomas Skaggs, Foothills of Mount Level

Re: IWF report- Colt drills, awesome!

#10

Re: IWF report- Colt drills, awesome!

John in IN

Chris Schwarz reviewed the Colt Forstner bits. You can find it on the PWW site. The editors gave them high marks.

Re: IWF report- Colt drills, awesome!

#11

Re: IWF report- Colt drills, awesome!

JoeW in Detroit, MI

That's where I bought my set. For a 7 piece set they were $19.99. They are the TwinLand type of brad point. Made in Germany. I have had good luck with them so far.