Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Drying Big Leaf Maple

Posts

Drying Big Leaf Maple

#1

Drying Big Leaf Maple

Doug Reynolds in Seattle

A friend recently took down a very large big leaf maple in his yard here in Seattle and was told by his wife this species cannot be air dried or, at least it doesn't do well. Anyone with knowledge as to wheter or not big leaf maple can be air dried and, any web site I can direct him for guidance and information? TIA, Doug.

Re: Drying Big Leaf Maple

#2

Re: Drying Big Leaf Maple

Bill Tindall

I saw a pack of this species at IWF and it had the look and feel of soft maple. I have never dried this species but I would think it would dry like soft maple, which is easy. From my experience with soft maple, it will be susceptible to mold. So, after it is sawed it needs to be put up on dry sticks immediately and good air circulation provided, either naturally or with fans. Once the surface is dry it will not mold during the rest of the drying.

If you are lucky it will be figured and worth a pile of money.

Re: Drying Big Leaf Maple

#3

Re: Drying Big Leaf Maple *LINK*

del schisler

or mold and look like it will need to tossed out. This is when you get this


http://www.hobbithouseinc.com/personal/woodpics/maple,%20spalted.htm

Re: Drying Big Leaf Maple

#4

Re: Drying Big Leaf Maple

George Colonel's Workshop-Havertown PA

Geeze Dell

A couple more posts like tjhat and I'll convert to turning for sure./

George

Re: Drying Big Leaf Maple

#5

Re: Drying Big Leaf Maple

Claudia Hayward

Big leaf maple air dries just fine. Be sure to sticker it properly and seal the ends with log end sealer (Anchorseal or something similar - but latex paint doesn't work well. Lee Valley's stuff is good). Be sure to paint the end sealer around the ends and down the sides about an inch. I've been doing this for years and woodturners who work with BLM air dry it all the time.

Re: Drying Big Leaf Maple

#6

Re: Drying Big Leaf Maple

Dave LaPine

I've air dried a bit of it here in Snohomish. Stack, sticker, weight it down, seal the ends like Claudia said and put some sort of roof over it. Rain is a comin' soon but I guess that's why they like to grow here so much anyway.