Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Walnut for cutting board question

Posts

Walnut for cutting board question

#1

Walnut for cutting board question

Barry Irby

I have just finished making a bed and night stands for my son and DIL. I have lots of walnut cutoffs many of which have part sap wood. I was thinking of making end grain cutting boards out of the rather than trash them. Any reason not too? Is anybody allergic to walnut in a cutting board? Any better Ideas?

Re: Walnut for cutting board question

#2

Re: Walnut for cutting board question

doug f, san clemente, ca

Barry - I have several cutting boards made from just such scrap and they're actually quite striking. Take some care in laying out the orientation of the heart vs. sap wood and I think you'll be pleased with the result.

I have two sons with some real allergy issues. Both have used walnut/maple cutting boards for a number of years with no problems whatsoever.

I would think to experience any type of allergic reaction to a cutting board, you would have to eat several of them. Not very tasty unless you saute them first is a lot of butter. :D

Have fun with your project.

Doug

Re: Walnut for cutting board question

#3

Re: Walnut for cutting board question

Robert R. Clough - Thorncraft

I suggest two problems, Barry.

First, yes, nut allergies do exist, and Walnut can be one of the most virulent.

Second, Walnut is easy to split with the grain. It is, for a hardwood, fairly soft. If you wish a dark wood, I'd alternate Cherry and Maple. The old Butcher Blocks were large end grain Maple slabs or blocks, usually 18" long or so. We had one years ago - big, heavy, SOB - that came from a Lake Ferry.

Re: Walnut for cutting board question

#4

I'd try it...

John in NM

Allergies to nuts have to do with oils in the nuts I believe, the wood itself is unlikely to be a problem. Short of finding an allergist who's also a wood expert, best thing to do is just make a few and see what happens. Play it too safe all the time, and you never end up making anything, just sitting around and worrying :D

I don't much like end grain cutting boards, as they're a lot of work and tend to split and check, but if the wood is going in the trash anyway, you mights well try it. Worst case, you've spent some enjoyable time making them and they last a few years.

Re: Walnut for cutting board question

#5

Re: Walnut for cutting board question

Howard Norman

Barry, I have used Walnut in several cutting boards but none of them where end grain. No problems ever reported. I like the contrast that Walnut gives to Maple. Since you have the scraps I say go for it

Re: Walnut for cutting board question

#6

Re: Walnut for cutting board question

paul in AZ

I've made several boards with walnut as part of some combinations of dominantly maple, with cherry, jatoba, wenge, purpleheart etc etc. accents. Whatever I had on hand that appealed to me.

Some of these woods may give termites indigestion but other than that no recorded troubles.

A fun site for design suggestions:

http://www.toolcrib.com/blog/2008/10/14/20-free-cutting-board-plans-the-4-that-blew-my-mind/

Re: Walnut for cutting board question

#7

Re: Walnut for cutting board question

Jesse Cloud

Me too, I've had walnut cutting boards for 15 years or so, ever since I first made walnut sawdust. Never a problem for anyone.

Having said that, the wood does have a natural insecticide and some people are allergic to it. But you're not going to ingest much of that from your food getting chopped on the board.

Like John says, give it a try!

Walnut also makes great little boxes, drawer fronts, pulls, handles, etc - lots of uses.

BTW, I don't use walnut for mulch or compost...

Re: Walnut for cutting board question

#8

End grain layout application *LINK*

Dave Paine

I have used Walnut in many of my boards, including the one I made for everyday use. Maple with Walnut strips.

For an end grain board, I found the application in the link very useful for laying out the pattern. Below is a picture of my first (and so far only) end grain board. The Walnut is closer to sap colour than I wanted. I only have picture before I finished. When finished the Walnut was darker.

I did learn that it is a good idea to check calibration of blade BEFORE doing all the cuts. I ended up with some pieces not quite orthogonal. Turned out my blade was a fraction of a degree off from 90 deg.

I


http://lumberjocks.com/projects/11372

Re: Walnut for cutting board question

#9

what was the process used for assembly of pieces

bill tindall

Re: Walnut for cutting board question

#10

Re: what was the process used for assembly of piec

Dave Paine

First need to make the slab. Picture before I ran through the planer.


Then cut the slab into strips based on dimensions from the software diagram.


For this design the strips are then turned 90 deg to have end grain facing up. Then "flip" alternating pieces for the desired pattern.

I glued the pieces two at a time, then glued the sub-assemblies. Wanting to get alignment as close a possible.

If I recall final assembly was then passed through the drum sander.

Assembly is not difficult. The "surprise" was the strips not being exactly 90 deg since my blade was a fraction of a degree off 90 deg at the time.

Spend the time on the initial design and dimensions. The software really helped me to try various layouts.