Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Rebuilt my homemade Air cleaner...Little Gloat

Posts

Rebuilt my homemade Air cleaner...Little Gloat

#1

Rebuilt my homemade Air cleaner...Little Gloat

Barry Irby

I found a squirrel cage blower many years ago and added a piece of plywood to it so I could tuck it into a shop window and use is like an exhaust fan. Then I got a window AC and converted the blower into an air cleaner. Basically surround it with four furnace filters and hung it up in the corner of my shop. It comes on with the lights and has been running for years every time I go in the shop. This thing has to be 35 years old. Today It started squeaking. I searched for an oil port but there was none. It turns out I had a guy in the HVAC industry save a couple of blowers for me. Two were larger and wired for 240. There was one wired for 120. I looked at rebuilding my air cleaner and it dawned on me I could swap the motors. Took about an hour, but it actually worked. Even managed to reverse the direction of the "new" motor. The new one is so quiet I almost can't tell it on. Pack Rattery pays off again.

Re: Rebuilt my homemade Air cleaner...Little Gloat

#2

Re: Rebuilt my homemade Air cleaner...Little Gloat

Robert R. Clough - Thorncraft

You obviously enjoy doing that sort of work, as do I. It is very enjoyable rebuilding or perhaps building, something - a tool - that actually works and well too boot. I also enjoy setting a machine up and hving it run well and true. This includes hand planes to to table saws or my shop made horizontal router table.