Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

How to move a big bandsaw

Posts

How to move a big bandsaw

#1

How to move a big bandsaw

Thomas

I'm the proud new owner of a Jet 18" band saw with less than 2 hours on it. Now I have to get it out of somebody's basement, and into a pickup, then into my garage. We'll have an appliance dolly and 3 or 4 guys. I'm guessing the table comes off fairly easily. Any idea if the motor can easily be removed, without screwing everything up? Any other ideas on how to move it easily?

I wasn't really in the market, but I couldn't resist the price...anybody need a 14" band saw:)

Re: How to move a big bandsaw

#2

Re: How to move a big bandsaw

Grant in Iowa

If it is like my JWBS-18, then just place a dolly on the "spine side" of it and strap around the pillar. Easy Cheesy. About like moving a refrigerator weight wise. Take an old pillow along or some foam to place between the dolly and the pillar to cushion and protect the powder coat.

The square base will keep it from shifting on the dolly. Shouldn't be too big of a deal. I have moved mine by myself that way...not up a flight of stairs, however.

You culd remove the lower pulley, and then motor, but I'd try to avoid it if possible as it will make the unit more top heavy.

Congrats on a nice saw, by the way.

FWIW,

Grant in Iowa

Re: How to move a big bandsaw

#3

turn it into lighter parts

bill tindall

I moved a larger heavier band saw by taking off the cast iron- motor, wheels, table. The remains were readily lifted by two persons and carried down a stairs.